Welding Machines By WeldingCity

• Premium power cable cover for air/water-cooled TIG welding torch 9, 17, 18, 20, 25 and 26 series.
• Cover length: 12-ft and 24-ft long. Cover width: 3-in for torch 9 and 17; 4-in for torch 18, 20, 25 and 26.
• With Zipper. Cover is made of high quality Nylon fabric.
• Use for most TIG welders from Lincoln, Miller, ESAB, Everlast, Eastwood, AHP, etc.
• US-based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

• Premium quality ER70S-2 mild steel alloy copper coated TIG welding rods; diameter 0.045", 1/16", 3/32" and 1/8" with 36" length.
• Specification: conformed to AWS A5.18/ASME SFA A5.18/ER70S-2; 36" (914mm) long welding rods with single end stamped. Shielding Gas: Argon/CO2.
• Features and Applications: ER70S-2 is a triple deoxidized wire which provides high quality and defect free weld deposits when properly used on most carbon steels for TIG welding (GTAW) process. All position welding. Typical applications: repairs on a variety of mild and low alloy steel; small diameter pipe and tubing; sheet metal applications; root pass pipe welding, etc.
• Package of 5-Lb and 10-Lb ER70S-2 TIG welding rods; diameter available: 0.045" (1.2mm), 1/16" (1.6mm), 3/32" (2.4mm) and 1/8" (3.2mm).
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

• 10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); 7" (176mm) length.
• AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed.
• Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only.
• 10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

• 10-pk premium TIG welding Tungsten electrodes 2.0% Lanthanated. AWS Classification: EW-La20 (Blue). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD.
• Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm); length: 7" (176mm). Ground annealed.
• High current range on DC. Excellent DC arc starts and stability. Lowest spitting and burn-off erosion rate.
• Box of 10-pcs Tungsten electrodes (2% Lanthanated EW-La20) with quantity discount. Buy More Save More!
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

• Premium quality 100-amp/150-amp with 10-ft and 12-ft cable air cooled MIG welding gun, ideal replacement for Hobart H-10. Fully interchangeable with Hobart MIG gun H-10 (195957) and H100S2-10 (245924).
• Usually H-10/H100S2-10 MIG gun can be found on Hobart Handler welder 130XL, 135, 140, 175, 187 and AutoArc XLT142 & XLT182, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING.
• Front consumables comes with Miller style 000068 (0.035") contact tip, 169715 nozzle, 169716 gas diffuser and 194011 wire liner. Current rating: 100A and 150A.
• Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications.
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

• Premium quality light-duty air cooled MIG welding gun 100A-150A with 10-ft and 12-ft cable replacement for Lincoln Magnum 100L model K530-5 (control cable with spade terminal).
• Use with many Lincoln welders series such as SP, Handy MIG, MIG-Pak, Pro 100, Pro-MIG, Pro-Core 100, Weldmark, Weld-Pak, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING.
• Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications.
• Front consumables comes with Lincoln/Tweco style 21-50 nozzle, 11-35 contact tip, 35-50 gas diffuser, 35-40-15 wire liner (.030-.035). Current rating: 100A and 150A; Cable length: 10-ft and 12-ft. Control cable terminals: spade type.
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

• Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal.
• M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING.
• Referenced part number from Miller: 248282 (M-100/10-ft); 249039 (M-150/10-ft); 249040 (M-150/12-ft); 249041 (M-150/15-ft); 169594 (M-25/10-ft); 169596 (M-25/12-ft); 169598 (M-25/15-ft).
• Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A; Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type.
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.

• 12 pcs torch package includes: 125 amp air cooled WP 9 series torch body with handle, 1 piece type EPDM rubber power cable hose 57Y01R (12.5 ft) or 57Y03R (25 ft), Nylon cable cover with zipper; Weldcraft style cable adapter 105Z57 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps).
• Available torch bodies: WP 9 (regular), WP 9F (flexible head), WP 9V (head with gas valve) and WP 9FV (flexible head with gas valve). Designed for long lasting service.
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

• Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.
• Specification: AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of stainless steel welding wire. 4\" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
• Features and Applications: for MIG (GMAW) welding process for 304, 304L, 308, 308L, 321 and 347 stainless steels. With a carbon content held to a max of .03% to to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.
• Available wire diameters: 0.023\" (0.6mm), 0.030\" (0.8mm), 0.035\" (0.9mm), 0.045\" (1.2mm).
• Package of one (1-pk), two (2-pk) and five (5-pk) ER308L MIG welding wire 2-lb spools available. US based welding supplier. Strong technical support with experienced customer service to address buyer's any question.

• Premium quality ER308L stainless steel MIG welding wire 2-Lb spool.
• Specification: AWS A5.9/ASME SFA A5.9/ER308L. 2-lb net weight of stainless steel welding wire. 4\" spool wrapped in moisture-resistant plastic film. Typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.
• Features and Applications: for MIG (GMAW) welding process for 304, 304L, 308, 308L, 321 and 347 stainless steels. With a carbon content held to a max of .03% to to reduce the possibility of intergranular carbide precipitation. Most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures. Shielding gas required, usually Argon/CO2 mix.
• Available wire diameters: 0.023\" (0.6mm), 0.030\" (0.8mm), 0.035\" (0.9mm), 0.045\" (1.2mm).
• Package of one (1-pk), two (2-pk) and five (5-pk) ER308L MIG welding wire 2-lb spools available. US based welding supplier. Strong technical support with experienced customer service to address buyer's any question.