Electricals - Exhaust Fans Products

• SIZE 2.5 inch inlet, 9 inch overall length, turn down exhaust tip
• MATERIAL LCGP tip is constructed out of high luster, polished stainless steel, keeps rust and corrosion away
• INSTALLATION welded on pinch clamp and bolt for easy installation
• DESIGN Angle cut and turn down. An affordable way to personalize your exhaust system
• BRAND GUARANTEE LCGP provide 1-year warranty. We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will serve you within 24 hours

• SIZE 2.5 inch inlet, 9 inch overall length, turn down exhaust tip
• MATERIAL LCGP tip is made from stainless steel and black paint coating to provide a sleek look to your car exhaust
• INSTALLATION welded on pinch clamp and bolt for easy installation
• DESIGN Angle cut and trun down. An affordable way to personalize your exhaust system.
• BRAND GUARANTEE LCGP provide 1-year warranty. We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will serve you within 24 hours.

• MULTIFUNCTIONAL DUCT: The flexible air duct tube adopts 2-layer aluminum foil to wrap the steel spring. Length can be extended up to 2 meters. Perfect for Heating Ventilation & Air Conditioning (HVAC), Kitchens, Bathrooms, Greenhouses, Grow Rooms, Grow Tents, Dryer, Air Conditioner, etc.
• ** HIGH PERFORMANCE: The aluminum material is Resistant to high temperature and water drops. Thermal Endurance: Temperature range from -22 to 266 Fahrenheit.
• ** FLEXIBLE & BENDABLE: Any angles & corners is available with the air duct. It is 30% more than the ordinary hose skeleton to meet more angle changes and smaller compression volume.
• ** ALL 6-INCH COMPATIBILITY: Compatible all 6-inch / 150mm duct, please check the size of your duct before purchase. Commonly used in air / oil / steam ventilation & exhausting of dryer exhausting outlet, topside of range hood, HVAC system, work bench, barbecue grill, growing system, etc.
• ** WRAPPED EDGE: Upgrade version with two ends wrapped, more safety to install to avoid scratch hands and device.

• Application:Exhaust Extension Flange is suitable for stardard 2.5in of inner diameter 2 bolt flange, will be a perfect match.
• Excellent Quality:Extension Flange using high - quality stainless steel materials for exquisite processing, the surface is polished smoothly, without burrs.
• Feature:Extension Flange Adapter has the characteristics of wear resistance and corrosion resistance, long service life, and can be used in your car well.
• Standard Specification:Stainless Steel 2-Bolt Exhaust Flange has undergone extensive quality and safety testing to ensure reliable performance.Built to meet standard specification, strictly follow factory quality control.
• Durable :Exhaust Split Flange is durable, not easy to damage, do not need frequent replacement, very convenient.

• Application: This exhaust pipe connector is used to connect pipe to component when your pipe is smaller than your component.
• Specification: The exhaust pipe adapter has a 2.75" ID (Fits over 2 3/4" OD Pipe) and 3" OD (Fits inside 3" ID Component). The length is 4", 1/16" thickness.
• Material: The exhaust pipe connector is constructed with 304 Stainless steel. It is totally rust and corrosion resistant.
• Package: There is a exhaust pipe reducer inside the box. Please be caution to the size to make sure this is fit for your vehicle.
• Warranty: 100% satisfaction. If you need any assists during usage, we are here to help.

• QUIET & POWERFULMixed flow design combined with a EC motor that powers high-quality impellers makes this fan truly energy efficient than a traditional line fan. With only 35 watts of power but gives a strong airflow up to 205 CFM, very low noise level, only produces 28 DB, this 4 exhaust fan is silent. Lightweight ABS blades reduce the airflow resistance, add airflow by 40%.
• BUILT TO LAST:Made of premium ABS plastic housing for superior durability, IP42 rated, making it highly resistant to dust and liquids, and performs well even in harsh environments. The exhaust fan is ETL/FCC listed.
• ADJUSTABLE SPEEDThe fan speed controller allows you to set your fan speed freely and it is essential for optimal growth of your plant.
• WIDE APPLICATIONSL Designed for air circulation boosting of cooling and heating systems and air-circulation. The 4 Inch Inline duct fan is a great option for grow tents, closet, storage rooms, kitchens, bathrooms, basements and more.
• WORRY FREE SHOPPINGSpider Farmer promises to provide excellent customer service support before and after buying. If you have any questions, please feel free to contact us via email.

• For Cadillac Escalade 2002-2015; Escalade ESV 2003-2015; Escalade EXT 2002-2013
• For Chevrolet Express 3500 2001; Silverado 2500 HD/1500 2001-2015; Silverado 1500/1500 HD/2500 HD/3500 Classic 2007; Silverado 1500 HD 2001-2006;
• Silverado 2500 2001-2004; Tahoe 2000-2015; Silverado 3500 2001-2007; Silverado 3500 HD 2007-2015; Suburban 1500/2500 2000-2014;
• For GMC Savana 3500 2001; Sierra 1500 2001-2015; Sierra 1500/1500 HD Classic 2007; Sierra 1500 HD 2001-2006;
• For Sierra 2500 2001-2004; Sierra 2500 HD 2001-2002

• This Air valve is made from galvanized steel coated in white powder RAL 9010 colour.
• Comes with neck made from galvanized steel to firstly connect the tube and then place the ceiling valve.
• By rotating the inner disc clockwise or anticlockwise, you can regulate the air flow. Can be used for supply, exhaust, and ventilation applications.
• Can be used for air supply, exhaust and ventilation applications, placed on ceilings and walls.
• Foam gasket is attached around the back of the frame, provides smooth and sealed positioning.

• Leisure Coachworks Bathroom Fan Motor 12V Vent Hood Motor with your existing fan to rid your RV, camper, or travel trailer of lingering smells and built-up moisture; This roof vent motor is quiet and can be used to power an RV vent fan such as a bathroom fan or a range hood fan
• 12-volt motor has D-Shaft - Weight: 3.2 oz - Fits Elixir, Heng's, Jensen and Ventline.
• ROTATION: This bathroom vent fan motor replacement has reverse polarity, meaning that it can be wired to turn in either clockwise or counter-clockwise rotations; Rotation direction depends on your fan blade wiring (one wire goes to the hot side of switch, other goes to ground); To determine the direction of spin on your existing fan, look down through the motor at the top of the blade
• Wire your fan to the motor switch, then wire the switch to your RV; Ensure that the wires connect black to black (grounds) and the other wires connect together; Save your old fan blades Pull on the hub (center part of blades) off the shaft and push blade center hub back on the new motor shaft (Flat side on motor shaft used to align hole in hub and slide on); mounting screws and fan blade not included
• FITS YOUR RV: 1/8-inch diameter x 3/5-inch length (3.17mm x 15mm) half-moon (D-shaped) shaft; 1-2/5-inch diameter x 2-1/5-inch length (36mm x 57mm) body; Compatible with Elixir, Heng's, Jensen, Ventline, and similar 6-inch (15.2cm) fan blades; There are multiple heights for the bathroom fan motor assembly - Compare this unit measurements with your current exhaust fan motors unit to ensure exact fit

• Aluminum wall grille for air supply are single and adjustable blade with multi- shutter damper for HVAC systems.
• Final finish in high resistance electrostatic white or aluminum paint color. Manufactured with extruded aluminum. Flat frame and adjustable blades. Available with multi-shutter damper.
• Its architectural design allows for elegant industrial, commercial, institutional or residential spaces. Its lightweight architectural design makes it an adequate option for passive or forced ventilation in any type of ceiling. It can be used for air injection or extraction in any type of enclosure, whether residential or institutional.
• Today LAMINAIRE has a large product line of grilles, diffusers and dampers for HVAC applications with the best product specifications. Our experience and brand recognition have allowed LAMINAIRE its international expansion, achieving a presence in more than 20 countries with the purpose of keeping growing.

• Made of High Quality Metal and perfectly designed for DIY and Trade
• Duct Connector Flange - Easily fit with different 4" inch plastic pipes for HVAC
• Easy to install - pre-bored holes to ensure easy and secure mounting to wall, ceiling or any other surface
• Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe
• Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper opens and closes automatically.
• Easy DIY. Designed to provide anti back draught, and fit in between Solid Plastic Ducting, Flexible Ducting.
• Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
• Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
• The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.

• Excellent material: Made of high-quality stainless steel, corrosion-resistant or high-temperature resistant, not easy to rust, durable, and long service life. - merge collector
• Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 1.5 merge collector
• Perfect choice: 100% brand new exhaust combined collector, with dual 1.5"ID and single 1.75"OD, which can perfectly replace the old or damaged old style. - 1.5 inch merge collector
• Stable performance: the whole adopts tungsten inert gas shielded welding, stable performance, exquisite workmanship, convenient installation and disassembly - exhaust y pipe
• High performance: radical deep sound while ensuring smooth exhaust flow, increasing engine output and efficiency. - merge collector

• FitmentThe exhaust merge collector is fit for most kinds of cars,you can purchase it as long as the size is right
• High QualityThe exhaust merge collector is made of high - quality stainless steel material, which have high reliability, anti-corrosion, wear resistance, sturdy, not easy cracked, can be used for a long time.
• Brand New100% brand new high quality exhaust merge collector,strictly full tested to ensure the best quality before shipment, safe to use.
• Professional DesignThe whole of is of tungsten inert gas welding which has stable performance
• Easy InstallationThe outlet exhaust merge collector is easy to install,can directly replacement for the old or broken one,perfectly match to your original.

• Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space
• Designed With No Moving Parts Ensuring Longer Product Life-Time
• Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind
• Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation.
• Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product.