Electricals - Exhaust Fans Products

• Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct
• A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel
• Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial HVAC applications. Best to use with VENT SYSTEMS hvac parts.
• Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no cold air / wind or smell can penetrate the ventilation pipe from the outside.
• The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.

• SPECIFICATION: Flat air vent cover is designed to cover a 3.93" x 3.58" Inch hole. Please note that it cannot be attached to a round vent. Outside dimensions of the cover are 5.83" x 6.02" Inches.
• INSTALLATION: Screw holes are pre-drilled. You can install without professional tools or assistance, installation process takes just a few minutes, easy to open, good ventilation, maximum exhaust airflow. Product can only be surface mounted. Dimensions between the screw holes: 4.37 x 3.74 Inches. No screws included.
• REMOVABLE SCREEN eases installation and cleaning process. Screen is designed to prevent wind, rain, snow, even birds and other external creature from entering your ventilation system.
• PERFORMANCE & FEATURES: High quality ABS plastic body and durable structure. Curved louvers, adding a beautiful design; adding UV inhibitors to the cover to prevent sun damage and cracking, Suitable for dryer or bathroom fan venting.
• Our aim is to provide the most suitable product and the best service. Good product, first choice for purchase, just for your peace of mind, comfortable and beautiful life

• A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.
• Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls.
• Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels.
• Features steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.
• Fan Size: 10 | Dimensions: 13.0 x 13.0 x 5.9 in. | Airflow: 631 CFM | Noise: 67 dBA | Bearings: Dual Ball

• Fits opening of 14 inch x 14 inch
• In/Out 10 Blade Fan, 3 speed
• Extremely durable High Quality Construction
• Pre-drilled and Marked Screw Holes

• 3 INCH FLEXIBLE DUCTING - Made of Aluminum and PVC Thermoplastic. 3inch diameter and 16.5 feet total length. Come with 2 pcs stainless steel clamps.
• DESIGNED for VENTILATION APPLICATIONS - We designed this aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents
• 4-LAYER DEISGN: Our dryer hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts black dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage
• EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - Aluminum duct hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze
• WIDELY APPLICATIONS - Flexible ducts usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other installations. it also can be as ac exhaust hose and dryer vent hose

• 3 INCH FLEXIBLE DUCTING - Made of Aluminum and PVC Thermoplastic. 3 inch (75mm) diameter and 16.5 feet total length. Come with 2 pcs stainless steel clamps
• DESIGNED for VENTILATION APPLICATIONS - We designed this aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents
• 4-LAYER DEISGN - Our dryer hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts grey dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage
• EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - Aluminum duct hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze
• WIDELY APPLICATIONS - Flexible ducts usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other installations. It also can be as ac exhaust hose and dryer vent hose

• Dimension2.25 inch inlet diameter; 3.25 inch outlet diameter; Overall Length:16.25 inch
• DesignWeld On - Muffler With Tip Slant Angle Cut
• MaterialHigh Quality T201 Stainless steel with black coating. Durable and Anti-corrosive,never Rusty.
• Wide ApplicationUniversal fits any 2.25" Outlet or 2.35" Inlet trucks car exhaust tail pipe.
• 1 Year WarrantyNo instruction is included. Professional installation is highly recommended.

• Size & Material: 3 inches (diameter) x 16 feet (length) when fully extended, flexible ventilation ducting made of aluminum foil and steel wire helix to preserve the shape.
• Thermal Endurance: with a good thermal insulation performance, works well with your portable ac device, Temperature endurance range from -4 ~ 176 degree F.(-20 ~ 80)
• Easy Installation: 2 pairs of 3 inch metal clamps made from stainless steel. Flexible length for exhaust fan blower / inline fan.
• Fire Proof Coating: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.
• Wide Applications: Air Duct is suitable for HVAC system. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications etc. Thick layer Aluminum on this ducting prevents gas and light leaks.

• Wide ApplicationFits for RV, camper, motorhome, trailer, boat, yacht etc.
• 12V RV Ventilation FanThis is Caravan Side Exhaust Outlet Unidirectional Dust proof Ventilation Fan
• Faster Exchaute FanSpeed: 3000RPM/min. So as to the Exhaust volume up to 3.3M3/min.
• Long life timeAdopts high quality material, durable to use. If you are unlucky to get the bad one please contact us for exchange.
• 100% Satisfied Guarantee1 Year warranty Guaranteed! If you find any problems with our Ventilation Fan, please feel free to contact us, we will solve it as soon as possible.

• OEM Part Number: 91-45497A, 90360, 18-9847
• Compatible with Mercruiser Alpha One, Alpha one Gen 2, Bravo One & Two, Blackhawk, MC-1 & R-MR
• High quality exhaust bellows expander tool, aids in the installation of the exhaust bellows
• This tool is designed to stretch out the exhaust bellow on Mercruiser Outdrives
• Note: Drive must be removed to use this tool

• USE FOR - Fresh air system.HVAC Ducting. Air ventilation and exhaust system. Kitchen air system. Plant lamp heat air exhaust system.
• SIZE - There are 4"(10cm) / 4.7"(12cm) / 6"(15cm) size diameter vent cowl for choice.
• MATERIAL - Made of 201 stainless steel, Durable and reliable.
• INSTALL - Easy to install and use. Installation attention better wear the gloves to install.
• DESIGN - There a filter screen in this vent cowl , it can prevent the little animals into your house.

• -4 INCH STAINLESS STEEL COVER: This round soffit air vent hood panel diameter 5.7 inch, bottom diameter 3.9 inch, height 1.6 inch, applied to all 4" circular pipe/ducting hose/wall air outlet etc.
• -201 MATERIAL: This soffit air vent made of 201 stainless steel material. environment and durable for your house using.
• -EASY INSTALLATION: the Stainless steel air vent is easy to install for wall. Adjusting the regulating valve of soffit buckle on the vent cover side to prevent drop.
• -BUILD-IN SCREEN MESH: Louver grille cover adopts build-in screen mesh, it help isolate things to into your house. giving more fresh air to your healthy life.
• -HIGH COMPATIBILITY: The soffit air vent suits for indoor or outdoor using of house. such as kitchen, bedroom exhaust, office, school and so on.

• ABS Material: Adjustable air vent made of high quality ABS material, safe, sturdy and durable.
• Adjustable Airflow: Can be rotating the middle panel to adjust the airflow.
• Installation Position: Available for wall mounted or ceiling mounted.
• Easy Installation: Put the air vent directly into the appropriate hole, connecting ducting hose to exhaust the fresh air. flexible and convenient.
• Widely Application: Perfectly for family rooms, offices, schools, libraries and other places that need better ventilation.

• Material: made of durable plastic: resist rust and corrosion, durable to use.
• Rid RV or camper of lingering smells in the bathroom and built-up moisture
• Compatible with Heng's, Elixir, Ventline (pre-1995), Jensen(pre-1995 range hood) roof vents and range hoods and 12 Volt motor with 0.094 inch round-shaped shaft.
• motor with 0.094 inch round-shaped shaft. The direction of spin is determined by looking down through the motor, at the top of the blade. which allows turning in both clockwise or counterclockwise. If these replacement fan blades rotate in the wrong direction, simply reverse the wires on the motor to change the direction the fan rotates.
• Package Contents: 1 x RV Vent Motor, 1 x White 6'' Vent Fan Blade

• Very quiet bathroom fan (1.2 sones) and Strong air movement (110CFM) for bathroom up to 110 Sq. Ft. Recommened for use in large room
• Two installation options: 1. For New Construction: It can attaching the fan housing mounts to the ceiling joists,if spacing between is 12in. ( if spacing between16 in.- 24 in, It can using suspension brackets.) 2. For Existing Construction : With No attic access installation and replaces most existing bathroom fans. it can be done entirely from the room-ceiling side no attic access needed installation
• Low profile white grill cover,Housing size: 9in x 8.5in x 6in with 4in duct. ceiling mounting Opening: 9.25in x 8.9in.
• Efficient and quiet,excellent motor perfomance, working at least 25000 hours
• Energy Star qualified, UL and HVI certified for performance assurance.Acceptable for use over a bathtub or shower when installed in a GFCI-protected branch circuit.