Electricals - Exhaust Fans Products

• Sizes: The KEDAKEJI exhaust tailpipe tip has a standard 3 x 5x 12 dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 5 inches outlet diameter exhaust pipes.
• Material: Made of sturdy stainless steel to drain water avoiding rust and corrosion. The surface is coated with black powder. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny.
• Bolt on installation: KEDAKEJI Pack of 1 exhaust tips. Bolt on design and this tailpipe tip can be installed directly. Note please check the size of tailpipe before purchasing.
• Function: The KEDAKEJI exhaust tailpipe tip is used as a a protection to your vehicles exhaust pipes with an outlet diameter of 5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Warranty: The exhaust tailpipe tip will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.

• Function: The KEDAKEJI exhaust tailpipe tip is used as a a protection to your vehicles exhaust pipes with an outlet diameter of 4 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Size: The tailpipe tip is 2.5 inches in inlet, 4 inches in outlet and 9 inches in length. Please note that to ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch.
• Materials: KEDAKEJI Pack of 2 exhaust tips. Exhaust tailpipe tip made of 304 Stainless steel Single layer flat mouth, electroplating flame blue, welding has very strong anti-corrosive,high quality.
• Design: KEDAKEJI tailpipe is made of stainless steel to avoid rust and corrosion. The surface is electroplated with flame blue, which makes your vehicle look more shiny.
• Warranty: The exhaust tailpipe tip will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.

• Function: The KEDAKEJI exhaust tailpipe tip is used as a a protection to your vehicles exhaust pipes with an outlet diameter of 6 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Size: 4inlet, 4 inch inside diameter Inlet, 6 inch outside diameter outlet,15 inch Overall Length. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 6 inches.
• Installation: KEDAKEJI Pack of 1 exhaust tips. Bolt on design and this tailpipe tip can be installed directly, easy and convenient. Just make sure that this is is correct size for your exhaust pipes.
• Design: KEDAKEJI exhaust pipe is made of stainless steel the tip has a polished, self-locking screw which makes your vehicle look more shiny. There is a small hole in the button. This will help drainage and avoid rust and corrosion.
• Warranty: The exhaust tailpipe tip will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.

• Dimension: 2 1/2" inlet, 2.5 inch inside diameter Inlet, 4 inch outside diameter outlet, 9 inch Overall Length. To ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch.
• Material: KEDAKEJI Pack of 2 exhaust tips. Exhaust tailpipe tip made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
• Design Double cut edge bevel, polished, welded, It makes your vehicle look more shiny.
• Function: The KEDAKEJI exhaust tailpipe tip is used as a a proection to your vehicles exhaust pipes witn an outlet diameter of 4 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Warranty: The exhaust tailpipe tip will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.

• Function: The KEDAKEJI exhaust tailpipe tip is used as a a protection to your vehicles exhaust pipes with an outlet diameter of 5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Size: 4inlet, 4 inch inside diameter Inlet, 5 inch outside diameter outlet,12 inch Overall Length. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 5 inches.
• Installation: KEDAKEJI Pack of 1 exhaust tips. Bolt on design and this tailpipe tip can be installed directly, easy and convenient. Just make sure that this is is correct size for your exhaust pipes.
• Design: KEDAKEJI exhaust pipe is made of stainless steel the tip has a polished, single layer crimp bevel,self-locking screw look more shiny. There is a small hole in the button. This will help drainage and avoid rust and corrosion.
• Warranty: The exhaust tailpipe tip will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.

• Dimension: 3inlet, 3 inch inside diameter Inlet, 4.5 inch outside diameter outlet,9 inch Overall Length. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 4.5 inches.
• Function: The KEDAKEJI exhaust tailpipe tip is used as a a protection to your vehicles exhaust pipes with an outlet diameter of 4.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Design: KEDAKEJI exhaust pipe is made of stainless steel the tip has a single-layer curling bevel, which makes your vehicle look more shiny. There is a small hole in the button. This will help drainage and avoid rust and corrosion.
• Installation: KEDAKEJI Pack of 1 exhaust tips. Bolt on design and this tailpipe tip can be installed directly, easy and convenient. Just make sure that this is is correct size for your exhaust pipes.
• Warranty: The exhaust tailpipe tip will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.

• High-quality materialThe exhaust pipe and muffler are made of high-quality stainless steel, which has sufficient heat resistance and corrosion resistance, and is durable.
• Freely retractableThe muffler can be independently supported, and can be freely retractable during operation and shutdown, so that the exhaust pipe does not bear additional load due to the installation of the muffler, and ensures the safety and reliability of the exhaust pipe.
• Scope of applicationExhaust muffler is used for 24 mm exhaust pipe, suitable for air diesel heater.
• Simple installationThis product is easy to install, has a good noise reduction effect, and has a long life.
• Product guarantee100% brand new and high quality.

• Quality MaterialDesigned for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life.
• Great PerformanceBuilt-in mounting feet allows easy vertical or horizontal installation and our 12V in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers.
• High PracticabilityThis type of blower is used for moisture-proof, and the size is smaller, which is easy to install in any limited area. The 5-blade fan maximizes airflow and efficiency. The fan provides excellent airflow for the engine compartment, galley, bilge, and nose of the aircraft.
• Size DetailThe size of this in-line air blower is 12.8*11*8cm / 5" * 4.33" * 3.54" and the intake pipe diameter is 7.5cm / 3".
• Condition100% brand new and premium. If you have any doubt about our product or service, please feel free to contac us.

• Specifications of The Napoleon Fireplace Blower Fan- Length x Width x Height: 9.75" x 3.73" x 3.23", Air discharge length: 7.13", Insulation: Class H (rated to 392 degree F), Motor RPM: 3000, Airflow in C.F.M: 110, Volts: 120, Frequency: 60 Hz, Power Consumption: 31 watts, Blade Material: Aluminum, Frame Material: Aluminum.
• Cross Reference NumbersGZ550, GZ552, EP62-1, GZ550-1KT, GZ550-KT, Rotom HB-RB59, R7-RB59, HBRB59, R7RB59, Rotom HB-RB61, R7-RB61, HBRB61, R7RB61, Rotom HB-RB58, R7-RB58, HBRB58, R7RB58, P58L180, GD36NTR.
• Installs Easily and Reduces Noise The GZ552 GZ550-KT fireplace blower fan for Napoleon fireplaces comes with double stick foam pads to attach it to the existing fireplace walls. The foam pads also help with stopping any noise created by the fan from being transmited to the sheet metal back wall of the gas insert and making it act like a sound amplifier.
• Heats Rooms EfficientlyThe GZ550-1KT fireplace blower fan helps keep the warm air moving, it does a great job at blowing the warm air into the room. The heat will be much more uniformly throughout the room, rather than being overly-concentrated just around the fireplace. Replacing your fireplace blower today, warming your home, warming your heart!
• Fits Brand The GZ552 GZ550 fireplace blower fan is designed to fit a number of fireplaces, including Continental and Napoleon. Universal Applications: The gz550-kt blower can typically be used in universal applications, so long as adequate mounting space is available.

• Aftermarket replacement gasket ,fits 3 inch pipe
• Contains 1 x exhaust flange, 1 x exhaust gasket
• Made of high quality stainless steel,the exhaust flange gasket kit is durable & rust resistant
• Manufactured to meet the fit & function of your original one
• Providing tight seal & long lasting working life

• TerraBloom's New Silenced EC duct fans are made for demanding applications requiring strong directional airflow with minimal sound output, specifically designed for installations in close proximity to the living or working spaces.
• Built with a 2" thick layer of acoustic sound-insulation foam inside a steel body and four vibration-reducing suspension springs inside, the ECMF-S series fans offer a 10-15 dBa of noise output reduction (depending on speed setting used) vs the regular, non-insulated ECMF fans of matching size. Such noise output is perceived as 50% quieter to human hearing.
• Built with a cutting-edge brushless EC Motor and dual jet type blades, this blower delivers a 288 CFM airflow rate using just 36 Watts at max speed. It translates into only $93 annual cost of 24/7 operation at max speed using $0.29 average cost per kWh. Our fans dont purge or waste electricity at lower speeds. ECMF-150-S is HVI Certified and meets the ENERGY STAR Most Efficient 2021 Criteria.
• Our EC fan gives you unique flexibility of controls choose any speed from 0 to 100% using the included variable speed controller without creating background noise or hum at low speeds. Or choose to upgrade to a wireless remote control (Model: ECMF-WR) or intelligent thermostat speed controller with temperature programming (Model: SC-ECMF). This fan also supports PWM and 0-10V controllers via a 3.5mm audio po
• Duct Diameter: 6 (150mm) * Airflow: 288 CFM * Power 36W * Noise: 31-50 dBA * Pressure: 396 Pa * Bearings: Dual Ball * Size: 21.5" x 9.6" * ETL Listed * HVI Listed * Energy Star certified * 2 Year Warranty.

• Application: Universal exhaust pipe adapter, suitable for connecting general muffler, tail pipe and other components.
• High-quality Materials: Exhaust pipe adapter is made of high-quality stainless steel, which has higher wear resistance, corrosion resistance, sturdiness and durability.
• Professional Design: Manufactured in accordance with standard specifications, using advanced cutting-edge manufacturing technology, high precision and long service life.
• Exquisite Craftsmanship: Mirror polished, smooth surface without burrs and hands, ensuring a perfect match.
• Easy Installation: The installation is simple and convenient, suitable for welding or clamp installation, and reliable in use.

• OPERATION IS SIMPLE: Control the bath fan functions with the easy-view LED buttons
• 2-FUNCTION SWITCH: Works with most bathroom ventilation fans with a 2-function switch
• FUNCTIONS INCLUDED: Switch can operate the bathroom exhaust fan and a light
• BEST USED WITH HOMEWERKS BATH FANS: Compatible with the following Homewerks bathroom fans: 7136-03, 7130-18-BT, and 7130-33-BT
• COMPATIBILITY: Compatible with most bathroom ventilation fans without a light
• EASY INSTALLATION: Installation instructions included; check the wiring to ensure your room has the correct wiring for this switch

• Upgrade 5 Blades WoodStove fanThe Cocoon fan for wood stove is equipped with 5 Blades, has Faster Speed and Larger Air Volume than 4 Blades, The heat active stove fan is designed to circulate the warm air created by a wood/coal or pellet-burning. Efficiently circulates warm air throughout the room
• Heated Powered Stove Fan Non-electircOur Thermal fan for wood stove is an Environment-friendly Eco fan. The thermoelectric module acts as a small generator to power the fan's motor. No batteries or power required! Improved warm air circulation results in greater comfort and reduces wood consumption from your stove
• Quiet Operation This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves
• Quality WarrantyIf any issues, please reach out to us via amazon or service Mail. The Package comes with a stove fan and a free Stove accessory -thermometer. please put fan on the side of the chimney, (leave a space of 15cm behind the fan) so that the fan can blow hot air into the room

• Variety of applications: perfect for HVAC ventilation, grow tents air circulation, green houses and grow rooms air intake and exhaust or light fixture cooling, kitchen cooking air exhaust, bathroom smell and moisture exhaust, etc
• Specifications: ducting size: 4 inch; length: 8 feet; material: PVC thermoplastic; inner material: aluminum foil. Temperature range: -22 degree F~212 degree F(-30 : 100)
• Premium material: high-quality aluminum foil, high temperature resistant and corrosion resistant, long lasting. PVC thick layer on this ducting can prevent light leaks. Include a pair of 4 inch stainless steel duct clamps
• Four-layer design: four-layer design (PVC layer + aluminum foil + PET + aluminum foil) makes it more durable and resistant to leaks, tears, and cuts
• Flexible ducting: the aluminum foil duct tube can bend in any direction, allows you to accommodate most space restrictions. Flexible length for inline fan, quick and easy to set up