Electricals - Exhaust Fans Products

• High quality brass Our Air Vent Valve is made of high quality brass material, corrosion resistant, durable.household plumbing automatic air vent valve for automatic air vent for solar hot water heater oil filter socket
• High accuracyThe exhaust mechanism is very reliable and the individual components are cast with high accuracy.automatic air vent for household plumbing automatic air vent valve oil filter wrench 12-0565
• High temperature resistanceThis valve features high temperature resistance, rust protection, reliably sealing. oil filter wrench 65mm 14 flute
• Easy to installThe thread size of this Air Vent Valve is standard 1/2in, easy to install. oil filter wrench pilot 65mm
• Ideal replacementThis quick exhaust air control valve is great replacement of the broken one. 65mm wrench for oil filter

• air conditioner hose vent Easy to install. Just extend out the exhaust hose to meet up with the existing hose, line up with the both ends, snap into place.
• air conditioner hose vent The hose is 15 cm in diameter ( outer to outer ). Universal fit to various AC using 15cm diameter hose. Please make sure you get the right size for your air conditioner models before place any order.
• air conditioner hose vent Constructed from quality material with good flexible, durable and portable. Not easy to crack even after long time use.
• air conditioner hose vent Low friction loss, if installed correctly, there will be no air leakage.
• air conditioner hose vent Extra Long- Extendable up to 2 meters

• Always measure the wall opening to determine which size you should order. Wall Opening Size = Listed Size. If the hole on the wall is 24"(W)x10"(H) please order the 24"x10" size option.
• Using our Return Air Grille within your ventilation system will improve your home circulation. The steel is stamped so there is no sharp edges.
• Durable white powder coated, made of Heavy Duty steel.

• Duct Connector Flange with rubber gasket - Easily fit with different 10" inch plastic pipes for HVAC
• Easy to install - pre-bore holes to ensure easy and secure mounting to wall, ceiling or any other surface.
• Made of High Quality Metal and perfectly designed for DIY and Trade
• Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe
• Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• Made of High Quality ABS Plastic and perfectly designed for DIY and Trade
• In-line Duct Connector - Easily fit with different 4" inch plastic or flexible pipes for HVAC.
• Easy to install - Push-fit chosen flexible or straight plastic duct on the coupler and fix with steel clamps or reinforced alu-tape.
• Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe.
• Vent Systems 4 inch (100mm) products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.

• STAINLESS STEEL MATERIAL- The dryer vent cover is made of anti-rust and corrosion resistant stainless steel with countersunk screw holes, 4 screws included.
• GRAVITY GRILLE- The air vent cover louvered close automatically when not in use and the vent grille stops rain, snow, wind, birds from entering home.
• EASY INSTALLATION- Inserting the tube into the air vent cover, then you only need to mount it on the wall in just a few minutes.
• EASY TO CLEAN- No more cleaning out the plastic dryer vent cover that kept crumbling, just clean the metal air vent cover with wet rag.
• NOTIFICATION: The hole diameter of the exterior wall vent hood is 95mm/3.74in. It fits a 4-inch pipe diameter / vent opening ( Please check the size of your dryer vent ).

• Feature 2.5in ID to 3.5in OD Exhaust Pipe Adapter With no burr structure, great flexibility, when you use it, will not hurt your hands.Built to meet standard specification, strictly follow factory quality control.
• Stainless Steel Material The high?quality exhaust head adapter is made of high?quality stainless steel and is durable.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life.
• Excellent Performance Exhaust Pipe Coupler Tube Reducer With wear?resisting and anti?corrosion resistance performance, able to cope with harsh environments.Exquisite workmanship, stylish and generous appearance.
• Suitable for Exhaust Pipe Connector suitable for all cars on the market and is used to upgrade or modify the exhaust pipe of the car.Practical and convenient in use.Such a practical tool you will need it.
• Easy to Install Exhaust Pipe Adapter Connector Reducer suitable for welding or clamp installation, it is very convenient to install.Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications.

• Designed for:Turbo Exhaust Flange Designed for turbocharging, can be used to convert 2.5 inch exhaust port to 3 inch.Built to meet standard specification, strictly follow factory quality control.
• Stainless Steel Material:3 Inch 2 Bolt Stainless Steel Exhaust Flange,Premium stainless steel material, rugged and corrosion?resistant, long service life.
• Excellent Performance:The Turbo Exhaust Fitting,2?bolt design ensures stable characteristics and high reliability, dependable to use.Made in strict accordance with standard requirements.
• Excellent Replacement:Stainless Steel 2-Bolt Exhaust Flange Excellent replacement for the old or broken turbo exhaust flange.Manufactured according to the original specifications.
• Easy to Install:Exhaust Pipe Adapter,The installation is simple and does not require complicated operations.Practical and convenient in use.Such a practical tool you will need it.

• [Applicable function]: Thickening-stainless steel elbow 3 inches 90 degree mandrel elbow thickness 1.5mm / 0.06 inches pipe wall-201 stainless steel elbow, suitable for automobile modified exhaust elbows, staircase handrails, etc.
• [Specification parameters]: Stainless steel 3-inch exhaust pipe 90 degree elbow, diameter: 3 inches, curvature: 90 degree Wall thickness: 1.5mm / 0.06 inches, anti-arc length: 7.28 inches, (can be welded to 3 inches outside diameter On the tube)
• [Applicable features]: Made of 201 stainless steel; durable: not easy to damage and rust: stainless steel. Anti-oxidation, 90 degree elbow exhaust pipe.
• [Material advantages]: no pollution, health, environmental protection, non-toxic, non-polluting, clean and polished surface.
• [Precautions]: Pay attention to the combustion hole when welding the stainless steel elbow. The wall thickness of the pipe is 1.5mm / 0.06 inch. If the combustion hole is accidentally welded, the pipe wall will be thickened and the welding will be perfect.

• Widely Use:Works with large outlet static exhaust rang hood.Fits for RV, Trailer, Camper, Motorhome.Swivels out when the blower over the range is on and closed once the fan is off.
• Premium Quality:Made of high quality vinyl,strong and durable,impact resistant,long-lasting.Has waterproof design.
• Dimension:overall exterior measurement 11-5/8 Inch x 5-1/4 Inch.Opening measurement 10-3/8 Inch x 3-1/2 Inch.
• Easy installation:Come with screws.Confirm the spot is correct.Draw outline of the vent cover.Drill and screw on.Install in minutes.
• Aftersale:Always feel free to contact us for a refund or replacement if there is any issue.No question asked.

• DUCT CONNECTOR: Used to connect two air ducts of different diameter to create a seamless ventilation system duct.
• THICK & DURABLE: Manufacture with galvanized steel, high-quality surface treatment, no burrs or nicks.
• EASY FITTING: Outside diameter: 4.9 inch and 3.9 inch. The connection can be fastened by using montage glue, tape or steel clips.
• LESS MAINTENANCE: Can prevent corrosion caused by moisture, use longer, and require less maintenance.
• FUNCTION: Paired with exhaust fans and dust collection units to adapt them to smaller. Also suitable for tumble dryers, cooker hood or any type of exhaust system.

• Heat insulated, helps cuts out hot air and the light that would normally shine through the hose, improve comfort and energy efficiency
• Special Velcro design for easy to install, no extra tools needed, instruction sheet included
• Universal fit both 5 in and 5.9 in diameter exhaust hose, high quality material, designed to provide insulation around your hose
• Measures 59'' length, easily cover regular exhaust hose
• Light gray color, blend in well with your room after installation

• WATERPROOF HIGH POWER 12V DUAL 5.5" (140mm) ADJUSTABLE VENT FAN IMPROVES COOLING BEHIND FRIDGE - The Beech Lane vent fan features two large 5.5" fans powered by your 12V connection to maximize airflow behind your fridge to increase fridge efficiency and cooling. Smaller fans such as competitor 3.5" (90mm) fans fail to do the job. It works great to clear out the high heat during RV season. **The fans are about 1-1.5" thick - make sure there is enough room for the fans to fit on your vent**
• RE-ENGINEERED STURDY MOUNTING BRACKETS FIT FIT AMERICAN RV VENTS - Unlike other vent fans that only fit European RVs and require zip ties to install, the Beech Lane vent fan has custom mounting brackets for easy installation on American RVs. **The fans are about 1-1.5" thick - make sure there is enough room for the fans to fit on your vent**
• CUSTOM USER-FRIENDLY REMOTE TO CONTROL MANUAL AND AUTO MODES - The vent fan comes equipped with a custom remote giving you full control to choose between a manual and an auto, temperature sensing mode.
• ADJUSTABLE TEMPERATURE AUTO MODE FOR EASY USE - The included temperature probe allows you to pick a temperature that when reached the fan will automatically turn on, gradually increasing speed as the temperature rises above your set temperature.
• LIFETIME MANUFACTURER WARRANTY - If the vent fan ever fails or is damaged, it is covered by a lifetime manufacturer warranty.

• This nylon mesh bug screen is made from polyethylene material with no odor. It is corrosion resistance and non-toxic without any worries of sanitation.
• Bug fan exhaust screen is insect proof net.It can prevent the growth of damaging mold and mould to keep clean and tidy.
• Three layer of exhaust bug shield can be used as a airduct on your fans or machine. The effect of absorption and exhaust is significant.
• The bug shield is 4" flange of air intakes. It is suitable for air and fan ducting outdoors.
• The unique fan intake bug shield is washable and durable. The drawstrings of particulate filter is adjustable. It is stable and strong to be used for a long time.

• Hole size :2.36 Inch, Compatible with 2.36 Inch(60mm) 2-Bolt Flanges
• It is including 5 Pieces Gasket
• Slotted Hole Measurement: 3.1 Inch-4.69 Inch (79-119mm)
• Gasket Thickness:0.078"(2.0mm)

• Sizes: The KEDAKEJI exhaust tailpipe tip has a standard 2.5 x 4x 12 dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes.
• Material: Made of sturdy stainless steel to drain water avoiding rust and corrosion..The surface is coated with black powder. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny.
• Bolt on installation: KEDAKEJI Pack of 1 exhaust tips. Bolt on design and this tailpipe tip can be installed directly. Note please check the size of tailpipe before purchasing.
• Function: The KEDAKEJI exhaust tailpipe tip is used as a a protection to your vehicles exhaust pipes with an outlet diameter of 4 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain.
• Warranty: The exhaust tailpipe tip will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products.