Steel - Stainless Steel Railing Products

• 316 stainless steel, with strong corrosion resistance
• 250 ft (76.2 meters) in length, 1/8 inch (3 mm) in diameter. 1700 pounds (770 kg) breaking strength
• 7x7 strands construction. Spool package, wrap with heat shrinkable film
• Designed for industrial and marine applications, for traction, tension, strapping, landscape and architectural use. DIY deck cable railing balustrade handrail. Not suitable for overhead lifting and aircraft use
• AGTEK guarantee - offer best after-sale service. If you are not satisfied with your purchase you can return it and for a full refund

• 1.LEFT &RIGHT DESIGN: Left hand lag screws X60pcs+ Right hand Lag Screws X60pcs. Left and right design will rotate wire rope to the same direction, which resolves the problem of twisting the wire rope.
• 2.MATERIAL: Made of T316 marine-grade stainless steel. super strong resistance to rust ,water and corrosion.
• 3.COMPATIBILITY: These Left & Right Screws used to mount the 1/8" wire rope cable in the wooden Balusters.
• 4.EASY TO INSTALL: The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensions, make your installation more easier, beautiful and secure.
• 5.APPLICATIONS: Perfect for DIY cable railing project for garden, stairs, and aisles.Contact us if you have any problems.

• Intermediate Post - This 36" rectangular cable railing post (brushed finish) is specially designed to be used as intermediate post between two structural posts. With a thickness of 1", it can bring you safety and an unblocking view at the same time. It is pre-drilled with 10 holes to work on horizontal sections and save your labor. It comes with a flat bracket to fit flat handrails
• Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts
• Code compliance - This intermediate rectangle post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add an intermediate post between them. Please search Muzata PS02 LH4S for structural posts. It is important to consult local building offices about the rules since there might be different requirements in some states
• Pre-designed System - We pre-designed a cable railing system to help you get a fully customized cable railing project. Components to build the system are sold separately: brushed structural posts PS01 PS02, brushed intermediate posts PS11 PS12, brushed handrails HT10 SL4, cable railing kits CB40 CR07, protector sleeves CR76 CR79 CR90, angled washer CR60, wire rope WR07, hydraulic crimper & cutter suit CK12, socket wrench CT16
• Related Posts - You might need several post types to build a complete frame based on different project situations: PS02 LH4S as structural posts, PS12 LH4S as intermediate posts, PS02 LC4S as corner posts, PS02 LA4S as stair posts to DIY for personalized requirements. If you are unsure how to do the cable railing system, please reach us by clicking "by Muzata" below the golden button. We can provide FREE DESIGN SERVICE without extra charges

• Kindly refer the product description before buying the product.
• 100% Brand New Handrail Round Pipe Base.
• Made Of Good Quality Stainless Steel,Durable.
• Surface Polishing,Corrosion Resistance And Durability In The Saltwater Environment.
• Can Be Used For Ship Yacht,Fiberglass Boats,Inflatable Boats,Yachts,And Other Boat.

• Made of high quality 304 stainless steel, rustproof and more durable, high tensile strength and fatigue resistance
• Adjustable range, to deal with the change of cable length under different temperatures, but also make it easier for beginners to install
• This kit is ideal for securing 1/8 inch stainless steel wire rope cables to wooden posts
• Very suitable for outdoor and indoor railings or horizontal, vertical, and straight cable guardrails of any angle or flat staircase
• Easy and simple to use this accessory to build railings. You can make railings for your garden, stairs and aisles, and the railings will look great

• This cable railing fitting is well-designed for attractive appearance. One-piece turnbuckle make your stair or deck railing system pretty and elegant
• This deck railing kit is made of T316 marine grade stainless steel, super strong resistance to rust ,water and corrosion.Excellent for both outdoor and indoor at any angle or flat stair's railing or horizontal,vertical,straight cable guardrail
• These deck railing hardware require a special hand crimper tool. Make sure to use Muzata customized hand swaging tool for stainless steel 1/8" fittings(search for MUZATA CR09). Standard crimper tools typically will not put a sufficient crimp on these steel fittings, which could result in cable loosening and slipping out
• Muzata is cable railing kit hardware Manufacture who provide full solution and offer the highest quality, most affordable cable railing hardware for your deck and balustrade railing project. Please search for these partnumbers to work better with:1/8 stainless steel cable(MUZATA WR01);customized hydraulic crimper (MUZATA CR09),cable cutter(MUZATA CR12);protector sleeves(MUZATA CR13), threaded terminal stud end(MUZATA CR23),stemball swage(MUZATA CR24), 30 degree angle beveled washer (MUZATA CR25)
• This cable railing hardware kit includes 20pcs lag screw swage turnbuckle tensioner and 20pcs lag screws stud fittings.perfect for installing your cable rails on the deck, no matter horizontally or vertically

• New in Box
• 100% Brand New
• Good Quality Durable and Eco Friendly Material.
• Package Contain Pack Of 1 Item.
• In case of any query please contact seller.

• INVISIBLE :This cable railing kit can be hided in the post,Invisible appearance will not impair views, invisible alternative to traditional non-tensioning terminals
• EASY INSTALL:These cable railing fitting very sample to install,Its simple push, pull, and fold mechanism allows for a more time saving and easier installation, Simply crimp the piece onto the end of your cable, feed into the post hole, bend the anchor piece, and pull until terminal is perpendicular to the cable and flush against the interior post wall. Meaning you only need to drill on one side of the post. You may also use these on angled sections such as stairs or ramps without the need of an
• MULTIFUNCTIONAL - These T316 marine grade stainless steel cable railing fitting can be affixed to railings, trellises, fences, patios, balconies, stairs, decks exterior, interior residential, or commercial settings,Available in 1/8" diameter cable to complement any railing design
• This fitting is a great solution for posts that are up against a wall or situations where you are unable to get behind a post to fasten. This fitting is meant to be used in conjunction with a metal hollow (inner diameter of over 1.77") tube terminal post (end post), please purchase the appropriate 1/8" cable tensioner on the other end of the cable in order to maintain proper cable tension
• Required for this toggle anchor terminal assembly includes the following: Swage Threaded Stud Terminal ->Search for MUZATA CR23;1/8" stainless steel cable ->search for MUZATA WR01;cable cutter->search for MUZATA CR12; Hydraulic hand crimper Swaging tool with custom die->search for MUZATA CR09

• Under strict process control and with advanced technology, our products have high quality and excellent workmanship
• This railing kit made of high quality T316 stainless steel, high tensile strength and fatigue resistance, weatherproof, rust and corrosion resistance
• Suitable for standard cables, a hydraulic crimping device is required to connect this kit with the cable
• Outdoor or indoor for various complex cable railing systems, stair railings, deck railings, garden fences and balcony railings
• The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted

• Ammarsons is a registered TradeMark, which stands for quality products. All our products are manufactured in India under the Make In India initiative
• This grab bar is a strong & durable product that gives a firm & sturdy grip
• Perfect for any part of the home, bathroom, shower or toilet, it is multi-functional & can be used as a holder, handle or a hanger
• This Grab bar has smooth, polished finish & is manufactured with stainless steel making it long-lasting & rustproof
• It is a universal, premium quality bar that can easily fit & match the aesthetics of any space

• [Specification]:Hydraulic Hand Crimper Tool - Length:approx.310mm, Weight:approx.3kg. Maximum crimping power:10 tons Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces.
• [Durable Material]: Made of durable materials, high strength and good toughness. And dies are made of hardened steel with chrome finish. It also provides increased stabilizes for longer service life. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable.
• [Humanized Design]: With this professional crimper and powerful crimper, you can crimp wires and butt connectors easily.It provides with more reliable and convenient crimping operations.
• [Wide Application]: It is equipped with 9 sets of the crimping dies. Good choice for battery and welding cables, power wires, electrical cables, etc. Fitting for 1/8" to 3/16" Cable. Cable Cutter Cuts up to 5/32" stainless steel cable.
• [Contents of Package]: Includes Hydraulic Hand Crimper with 9 sets of the crimping dies, seal rings, strong protective carrying case, cable cutter and pair of work gloves(random delivery in blue or yellow).