Water Management System - Water Level Controller Products

• Quality: - Made of ABS plastic, the product is rust-proof and corrosion resistance with 180 degree adjustable arm.
• Easy To Use: - Does not require any power source to operate. Install and screw it manually to adjust the angle which is formed by the float and valve body.
• Application: - Suitable for small ponds, storage tanks, aquarium, etc.
• Warranty: - The products come with 1 year warranty (To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section.)

• Can be Used With hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps etc.
• Features : Float Can Be Reversed For NO / NC By Opening Bottom Lock as Per Your Requirement / Contact : NO / NC
• Stem Material : PP Corrosion Free , Technology : Magnetic Advance Technology , Wire Length : 2 Meter ,
• Ideal Operating Ratings : Voltage: 2 to 50V DC .Current: 1amp / Max Current : 1.2A (DC), Max Switch Watt : 10W
• Switch Configuration : SPST , Float Ball Material: PP With excellent Acid and alkali / alkaline resistance , WIRE : Premium Tin Coated 14/40 Single Core For High Performance

• Six Nos. Of Sensors
• No Corrosion Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Long Length Of Wire Of 1.5meter Is Suitable For Tanks Upto 2000 Litres

• Water level controller
• Color : grey
• Model : fully automatic

• Cable: 3 Meter (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC and Weight: 635 g
• Endurance: =500,000 times of wire and Plastic Body Electrical
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

• Single Phase Fully Automatic Water Level Controller,
• Anti Corrosion Stainless Steel Sensor, this model is used for submesible motor or for motor which required starting torque to start the motor.
• Contact capacity : 30 A
• Up to 3 H.P. Supported
• Universal Model Support To All Types Of Motors And Starters

• Fully Automatic water Level controller With Buzzer Sound For Tank Full and Tank Empty ,Control both tank Underground Tank To Overhead Tank fully automatically.
• Work With Any Single Phase Motor Work with MCB switch type StarterFor Home ,Office ,Hospital,Restaurant
• No Man Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /.Avoid Overflow & Dry Running
• Saves Electricity, save water. 1 Year Warrenty

• SAVE WATER,TIME,MONEY
• FOR SINGLE TANK,AND ALSO USE IN DUEL TANK
• installation methods
• 1ST-INSTALLATION GUIDE IN PAKING BOX
• 2ND-INSTALLATION VEDIO ON YOU TUBE
• 3RD-YOU CAN CALL OR WATSUP OUR ELECTRICIAN

• Automatically Switch on the Pump when Overhead Tank reaches at reserved water level
• Automatically Switch Off the Pump when the Overhead tank is full.
• Can work on Both Manual and Automatic modes.
• Show 4 different water levels in overhead tank with colored LED indication
• Beep sound warning before Switching On/Off the motor in Automatic Mode.
• No separate Switch for Motor. It can be operated from the device Itself.

• No Current/Voltage is passed through Water, therefore No Electrolysis /Salt Deposition
• Corrosion Free & Rust proof sensor, It can be used in Hard water also : High grade SS sensor
• 24A Load capecity - 1.5/2HP (MAX) : Can use for Monoblok & submersible pumsets
• Very compact in size (4 inch X 2 inch)
• 1 YEAR WARRANTY

• Quality: - Made of high quality ABS plastic, the product is rust-proof and corrosion resistance.
• Easy To Use: - Does not require any power source to operate. Stop water supply according to water level.
• Application: - Suitable for ponds, storage tanks, aquarium, swimming pools, etc.
• Note: - It needs to be installed vertically straight (Check the installation image).

• Easily converted from normally open to normally close
• Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms
• Temperature Rating : -10~80?? ;Accurate error: ?2mm ?In the water?;Repeatability: ?1mm ?In the water?

• Scaling Free Sensors Technology, NO SALT deposition on sensors. Suitable for Submersible and monoblock pumps
• Ideal for non-contactor submersible panels (ON and OFF with MCB only, No Red and Green Push Buttons to ON/OFF)
• Ideal for monoblock pump for underground to overhead water tanks automation

• Six Nos. Of Sensors
• Anti corrosion stainless sensor
• Material SS 304
• Easy to use
• Can have capacity upto 2.5 sq mm wire fitting
• Included components: 3 Nos. Stainless Steel Sensors

• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC
• Cable: 5 Meter (i.e. customize wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• Endurance: ?500,000 times and High quality of wire and Plastic Body Electrical
• Tested Ok Product

• Automatically Switched OFF the motor as soon as the tank is filled with the water. It eliminates manual efforts and provides a flawless automatic operation.
• Automatically Switched OFF the motor as soon as the tank is filled with the water. It eliminates manual efforts and provides a flawless automatic operation.
• Solves the water tank overflow problem by switching off the motor at the correct time. This will save a great amount of water and minimize wastage and provides a peace of mind.
• Automatically Switched ON the motor when the water level decreased to a certain level, this will ensure smooth and un-interrupted water supply throughout.
• Save Water Save Electricity Save Time. Suitable for 3 phase water pump (starter)