Water Management System - Water Level Controller Products

• Low Voltage (130V), High Voltage (270V) & Overload Protection.[With Amp. Adjustable knob]
• Inbuilt water level Upper and lower bath tank control
• Both tank empty & feeling LED indicate. With High low overload and auto, LED indicate.
• Why & What Is Run Capacitor? :- The Run Capacitor Is Inbuilt Provided In The Device. The Run Capacitor Provides Support To The Motor During Its Running Or Operational time And This Run Capacitor Is of 36.mfd, Therefore, It Can Operate on upto 0.5 To 1.0 Hp. Motor
• Why & What Is Start Capacitor? :- The Start Capacitor Is Inbuilt Provided In The Device. The Start Capacitor Is Provided Because With Time And Regular Use Some Of The Motors Don't Start Or Get Required Pick Up On Its Own So Here The Start Capacitor (50.mfd) Provided Gives Extra Support To The Motor So That Motor Can Get Its Pick Up And Start Without Any Problem.

• 20A@230V
• AC Single Phase (Upto 2HP)
• Suitable for Bore Well and Water Pump..

• Working: Fully Automatic Water Level Controller . This Model Will Automatically Switch ON MOTOR When Water Level Reached At High Level Sensor(B1) And Automatically Switch OFF When Water Level Reached At Low Level Sensor (G1) .The Motor. As Per Water Level . Has AUTO ON And AUTO OFF Operation. Suitable For Motor Pump Up To 2 Hp Operated By A Normal ON/OFF Switch / MCB. Also Suitable For Electronic Starter. Suitable For Underground Or Storage Tank Only.Has LED Indications For Motor ON & Sensor
• Fully Automatic Controller ,Micro Controller Based Design ,Power Failure protection.(Not Start Motor Every Time on Power Failure.)
• No Man Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /.Avoid Overflow

• Advanced wireless fully automatic water level controller helps to switch on the motor when water level of tank is low and switch off when it becomes full. It has 3 devices - 1 Outdoor Transmitter for overhead tank (OHT), 1 Indoor Transmitter for Underground tank and 1 Controller
• Outdoor Transmitter can be fixed near the OHT. It has a rain proof IP-65 enclosure. It has inbuilt rechargeable Li-Ion battery powered by solar panel. Indoor Transmitter can be fixed near the sump. It needs Input AC 230V. Controller can be fixed near the motor control switch. It needs Input AC 230V
• This product covers the distance of 700 to 1000 meters RF range in line of sight.
• Suitable for Sump to Overhead Tank SetUp. Suitable for motor pumps that are operated by simple switch/MCB
• Has Low/High Voltage, Dry Run and Fuse Protection. | Has 1 year manufacturer warranty.

• Smart Gadget with long life

• Supports Single Phase AC230V. Suitable for Borewell to Tank set up (Underground or Corporation line water to Overhead tank set up).
• Has LED indications for Power ON, Low/High Voltage, Dry Run, Motor ON. Also has Four level LED indications to know the level of overhead tank
• Dry run protection. Low/High Voltage protection. Corrosion free sensors
• Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs. In MANUAL mode, the motor pump will be constantly running.
• This controller unit has a semi-automatic function (Manual ON and Auto OFF function). Just keep the controller in MANUAL mode for the motor to get switched ON and then change it to AUTO mode for Automatic OFF.

• Supports single phase AC 230V and suitable for sump to tank set up (underground or ground level tank to overhead tank set up)
• Has LED indications for power on, low/high voltage, dry run, motor on and also has 4 level LED indications for the tank (25%, 50%, 75% and 100%) and 3 LED indication for sump level (33%, 66% and 100%) it is both controller and indicator
• Dry run protection and low/high voltage protection and corrosion less sensors
• Has manual mode and auto mode functions and in auto mode, auto on and auto off operation occurs and in manual mode, the motor pump will be constantly running
• This controller unit has a semi-automatic function (manual on and auto off function). just keep the controller in manual mode for the motor to get switched on and then change it to auto mode for automatic off

• VENEX Digital Water Level Controller and Starter Panel with Volt and amp Meter with HV LV Dry Run Protection Suitable Upto 1.5 HP Motor WLC MONO 6
• customer care number 9898111264
• fully automatic starter with water level controller
• inbuilt 50 MFD capacitor and 6 SS level
• auto manual function
• cyclic timer for auto on off
• 2 digital display for AMP and voltage
• dual tank oprating
• 6 month warrenty

• Smart Gadget with long life, .
• Three Modes(Fully auto, Semi Auto, Manual) mode operation.
• NO need to replace the old Starter box
• Can work with any DOL starter Unit.
• Suitable for all pumps with no limit on HP
• Can work with single phase and 3 phase starters also.
• Very easy to install and use, even a child can operate it.
• Do not hamper the Existing Starter Box Features and Functionality.

• Features: Fully automatic, Made in India, One Year Warranty, 4 level indication, motors up to 2 hp, 5 SS sensors, Sensors with 1.5m wire, Silent operation, Auto & Manual Mode, Top-Up Switch (manual on auto off), WORKS WITH MCB TYPE STARTERS (Not suitable for push button type starter )
• Package contents: 5 High grade stainless steel water level sensor for tank with 1.5m of attached wire (suitable for tanks up to 2000L), Main controller panel, Instruction manual, Screws & Wire ties
• Working: This fully automatic water level controller is suitable for single tanks with water supplies having 24 hr water availability (Like submersible pumps). It will switch ON the pump as soon as the level falls below 25% and will turn it OFF when the tank is full.
• Top-Up switch to allow Manual ON Auto Off operation
• Installation videos make installation very simple

• 20A@230V
• AC Single Phase (Upto 2HP)
• Suitable for Bore Well and Water Pump..

• A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.
• Contract rating (Max): 10W
• Switching voltage (Max): 110VDC
• Switching current (Max): 0.5A
• Breakdown voltage (Max): 220VDC

• Fully Automatic Water Level Controller With Dry Run Protection Single Phase,

• WLC-22 WATER LEVEL CONTROLLER WITH 3 SENSAR
• Power Supply (A1 & A2): 100 to 270V AC Smps,50/60Hz,
• Power Supply (A1 & A2): 100 to 270V AC Smps,50/60Hz,
• Output: 1 Relay 1 C/O 5A 230V AC
• ESAY TO USE

• 12 Nos. Of Sensors
• Anti Corrosion Carbon Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Shock Proof
• Long Life
• No Contamination
• With Wire Length Of 1.5m These Sensor Are Suitable For Water Tanks Up to 2000L