Water Management System - Water Level Controller Products

• Automatic as well as manual operation
• 3 sensors
• when the tank is empty , it will on the motor automatically
• when the tank is full , it will switch off the motor
• suitable for water pump as well as submersible pump

• MEGAFLOW Float Switch Sensor/Water Level Controls Tank Overflow, Controls Sensor Automatic Water Motor Off when Tank Full
• MEGAFLOW Float Switch Sensor controls Automatic pressure pump and Sump/open well Pump off when tank empty at a level to protect pressure pump, Sump/open well Pump as a Dry Running Preventer for safety from motor damage
• Rated Voltage:- 220-240V; Frequecy:- 50/60Htz; Rated Current:- 10A; Contacts:- NO+NC; Weight:- 625 Gm; Maximum Working Temperature:-60 c; IP Rating:- IP67;
• INSTRUCTIONS FOR INSTALLATION Insert the cable in the counter weight (Black color part), from the conical part and rotate it. Thus causing the given ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure
• INSTRUCTIONS FOR INSTALLATION / CONNECTION is given in detail in manual ( Depicted in pictures of products also ) Available in 2 Meters/ 3Meters/ 5Meters wire length and also pack of 1, 2, 4, 8, 12 and 20 Pcs

• Suitable for motor pump(Monoblock, Jet pump, etc.) operated by simple ON/OFF switch or MCB.
• Has the facility of setting L/H Voltage, O/U Load Current, Cyclic ON/OFF Timer, Power ON delay/Reset Time, Trip time, Dry Run Reset time and for changing the Password.
• Attractive 7 segment display with soft touch switches. Also has user friendly menus.
• Auto, Manual and Semi-automatic operations. Password Protected settings.
• Long life. Easy access. Advanced Embedded Technology.

• Can Access or Control your devices from anywhere in the world at anytime
• User Friendly Mobile App. Easy method of scanning through QR code.
• Live Status of Water Tank Levels, Pump ON/OFF status. Dry run sense time and reset time can be set as per user choice through the AppAny number of members can access the App. Any number of devices can be added in one device
• FOTA feature. All Firmware Updated Through the Air. 1 yr warranty
• Smart controller is suitable for motor pump operated by simple switch/mcb. Note - Our Smart device needs input power supply 230VAC

• Motor Wattage: 20A@230V
• AC Single Phase (Upto 2HP)
• Garrenty: 12 Months
• Sensor with Cable 1 Meter
• Only for submersible Pumps having Starter Panel

• SUPPORTED TO ALL TYPE OF SINGLE PHASE WATER LEVEL CONTROLLER
• SENSOR BASED DRY RUN PROTECTION
• AUTO DRY RESET 30 MINUTE, MANUAL RESET OPTION ALSO AVAILABLE
• SUPPORTED UPTO 3 HP
• DRY RUN CAN BE BYPASS

• Voltage: 250vac current: 15a shape: squarez
• Design temperature: 80degree c
• Contacts: NO+NC
• CFLS with 2 meter cable length
• Product colour may slightly vary due to photographic lighting sources or your monitor settings

• easy to install
• leak proof
• good work
• no need plumber

• Endurance: =500,000 times of wire and Plastic Body Electrical
• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC and Weight: 660 g
• Cable: 3 Meter (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

• Suitable for Single Ph Upto 1 HP
• Fully automatic water level controller with dry run protection single phase
• Contact capacity : 7 A
• Easy to Use and Install

• One Year Warranty, Sensors with 1.5m wire, SS Sensors, Motors up to 2Hp, Fully Automatic, Made in India, Easy Installation, Silent Operation, Auto & Manual Mode, Durable, Compact, Shock Proof Plastic Enclosure
• Fully Automatic Operation: Turns the motor ON when water level falls below 25% and turns it OFF when the tank is full.
• Package contents: 3 sensors , Main water level controller panel, Instruction manual, Screws & Wire ties
• Suitable for single phase MCB Type Motor Starters and Submersible Pumps
• Easy Installation: Installation manuals in Hindi and English make installation very simple

• Voltage: 250Vac Current: 15A Shape: Squarez
• Design Temperature: 80?C
• Contacts: No+Nc
• With 3 Meter Cable Length
• Product Colour May Slightly Vary Due To Photographic Lighting Sources Or Your Monitor Settings

• water level controller for submersible control panel (runing and startring capacitor types)
• support up to 5 hp single phase submesrible panel
• having 2 power relay (40 amp)
• dual tank oparating with 6 ss sansor and auto manual function
• manufacturer number 9898111264

• Smart gadget for water management

• Suitable for any AC motor that are operated by simple switch/MCB (Single phase motor - Monoblock, Jet Pump, Submersible, etc.)
• Seven Segment Display: Attractive display. for voltage, current, cyclic timer, power on delay, dry run time, password settings and live data. Over Head Tank Level Indication: 25%, 50%, 75% and 100%. Under Ground Tank Level Indication: 25%, 50%, 75% and 100%.
• Cyclic Timer: It has ON Time & OFF Time options. Duration: Maximum 99 Hrs and 59 Minutes.
• Protective features such as Dry Run and L/H voltage, O/U Load, Trip time.
• Password protected and helps for Authorized usage