Water Management System - Water Level Controller Products

• Automatic Water Level Indicator With Overflow Buzzer Sound. With Stop Buzzer Button. and 5 Sensor.
• Four Level water Indication 25%, 50% ,75%, 100%, ,Micro Controller Based Design ,Buzzer off Button For Sound Off Buzzer .
• Very Easy to Install and Buzzer Sound To Avoid Overflow. Buzzer Acknowledge Switch also Avalable for easy operate Buzzer .
• Longer Life No Mechanical System /.Avoid Overflow

• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• When the water level in the tank becomes low, means water get down from middle sensor, motor get switch on automatically. The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. the motor automatically gets switched off
• Package Contain : 1 Water Level Controller Unit. 3 no S.S Sensors. 1 user manual with technical details
• Suitable to 0.1 HP to 2.0 HP Motor
• Auto and manual switch available

• Three Nos. Of Sensors
• Anti corrosion Carbon sensor
• Compatible with all microtail water level controllers models
• 1.5 meter wire attached
• Easy to fit and use

• Fully Automatic Operation with Manual Mode Selection
• Capacity upto 3 HP
• Float Level Sensor
• Water level indication led's
• With Optional Underground Tank Installation

• SS pin moulded within Polypropylene.
• Cable Length: 1.5 Meters.
• Completely insulated wire joints.
• SS-316 pins are used in it to avoid the rust and chemical resistant.
• US standard Tin Plated copper wire

• NOT SUPPORETD TO SUBMERSIBLE MOTOR
• Anti Corrosion Stainless Steel Sensor
• Contact capacity : 15 A
• Up to 2 H.P. Supported
• Automatic Water Level Controller

• Water Level Controller
• Circuit
• 30 AMP

• auto ON after water supply arrived,auto OFF after tank full
• auto OFF even water supply RESTORED
• INSTALLATION method
• first-installation guide in the paking box
• second-fitting vedio on YOUTUBE
• youtube channal.VAHRA TECHNOLOGY
• third-videocall on whatsapp our ELECTRICIAN

• Cable Length : 2 Meter Corrosion Free Material
• Can be Used With Tank Pools , Hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps Water Level Controllers etc.
• Caution : Your Project Should Not Have Mercury in It
• Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC, Max Switch Current : 500 mA (DC), Max Switch Watt : 10W
• Advance Magnetic Technology

• Six Nos. Of Sensors
• Anti Corrosion Carbon Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Shock Proof
• Long Life
• No Contamination
• With Wire Length Of 1.5m These Sensor Are Suitable For Water Tanks Up to 2000L

• Onoflot Vertical Float keeps the electric contact away from water.
• No other water level controllers have this peculiarity giving 100% security for electric loss.
• One Year Guarantee
• Made with High Quality Components
• Easy To Install

• SAVE WATER,TIME,MONEY
• fully auto FOR DUAL AND SINGLE TANK
• installation methods
• 1ST-INSTALLATION GUIDE IN PAKING BOX
• 2ND-INSTALLATION VEDIO ON YOU TUBE
• 3RD-YOU CAN CALL OR WATSUP OUR ELECTRICIAN

• Fully automatic water level controller with dry run protection single phase
• Anti corrosion stainless sensor
• Capacity : 20 h.p.
• Start, stop, auto, manual switch
• Tank water level indication, pump on indication

• Semi automatic Water Level Controller Manual On, Auto off, By Bee Smart
• Suitable for only Contacter Type Submersible starter ,190-260 VAC
• Package contains: Semi Automatic Water level controller 1 unit, User Manual S S 316 Sensor one pair.
• Warranty:1 Year Replacement.
• New BRAND: BEE SMART Semi automatic Water Level Controller MODEL: BEEWLC-1 Save Water Save energy Supply voltage : 190-250 VAC,Controller contact 7 A NC . Suitable for contactor TypSubmersible starter no Motor H P limit Depend on starter capacity? ?.

• Floaty Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System
• Rated voltage: AC 125/ 250V & Rated MAX current: 16(4)A/Contacts: NO+NC & Weight
• Cable: 2,3,4,5 Meter (i.e. customize wire length is available)/ A float switch is a device used to detect the level of liquid within a tank.
• Use: Water Level, liquid level Controller etc,
• The switch may be used in a pump, an indicator, an alarm, or other devices

• Fully automatic water level controller with dry run protection single phase
• Anti corrosion stainless Steel sensor
• Contact capacity : 30 A
• Start, stop, auto, manual switch