Water Management System - Water Level Controller Products

• This Model Will Automatically Switch ON And Automatically Switch OFF The Motor. Has AUTO ON And AUTO OFF Operation. Suitable For Motor Pump Upto 2 Hp Operated By A Normal ON/OFF Switch / MCB. Also Suitable For Electronic Starter. Suitable For Overhead Tank Only. Has LED Indications For Motor ON. Also Has High And Low Level LED Indications To Know , Corrosion Free Sensors. Has MANUAL Mode And AUTO Mode Functions. In AUTO Mode, AUTO ON And AUTO OFF Operation .
• Fully Automatic Controller ,Micro Controller Based Design ,Power Failure protection.(Not Start Motor Every Time on Power Failure.) we provide SS 316 grade sensor so you no need maintenance for sensor .no corrosion no oxidation.
• No Man Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /.Avoid Overflow
• Saves Electricity, save water. 1 Year Warranty on Device, Customer care-8000066255

• (12 Months Warranty) New Updated . Switches ON the Pump when the water in the Overhead Tank goes below the Pre-decided minimum level.

• An automatic water tank level controller is capable of both draining and filling simultaneously with a single device.
• GIC water level controller 4421AD1 comes with a sensitivity level from 1k to 200k Ohm.
• This Liquid level controller Protects submersible pumps against dry running and prevents overfilling.
• It Also Enables maximum utilization of incoming liquid supply.
• The GIC 4421AD1 controller is Specially designed for corrosion and shock-resistant sensors to ensure trouble-free operation.

• Can be Used With hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps etc.
• Features : Float Can Be Reversed For NO / NC By Opening Bottom Lock as Per Your Requirement / Contact : NO / NC
• Stem Material : PP Corrosion Free , Technology : Magnetic Advance Technology , Wire Length : 2 Meter ,
• Ideal Operating Ratings : Voltage: 2 to 50V DC .Current: 1amp / Max Current : 1.2A (DC), Max Switch Watt : 10W
• Switch Configuration : SPST , Float Ball Material: PP With excellent Acid and alkali / alkaline resistance , WIRE : Premium Tin Coated 14/40 Single Core For High Performance

• (1)Fully automatic water level controller with dry run protection single phase
• (2)Anti corrosion stainless sensor
• (3)Elecrolysis -Free
• 4)NO Chemical Reaction Inside Water
• (5)Contact capacity : 15 A

• Controller Unit 10 A Load Capacity and Upto 2 Hp Motor

• Degree of tightness: IP-68
• Maximum temperature: 60? C
• Rated Voltage:- 220-250V; Frequecy:- 50/60Htz; Rated Current:- 10A; Contacts:- NO+NC; Weight:- 625 Gm; Maximum Working Temperature:-60 c; IP Rating:- IP68
• Installation: Set the counterweight on the power cable to control the level. Connect the electric cable to the electric pump and then fix it inside the water tank. The length of the cable between the point of attachment of the article and the body of the article determines the water level. The power cord terminal should never be inserted into water during installation.
• Instructions for use for the filling operation. Connect the blue control cable to the electric pump and the black wire to the neutral wire as shown in the picture to fill it with water (the brown wire must be waterproof). The electric pump begins to fill with water and when the water in the tank reaches a level stops working.
• Instructions for use for the emptying operation. For the draining operation connect the brown cable to the water pump and the black cable to a neutral cable, as shown in the picture (the blue cable must be insulated). The electric pump stops when the water level reaches a level and if it exceeds this level it starts again to expel water.
• Installation: Set the counterweight on the power cable to control the level. Connect the electric cable to the electric pump and then fix it inside the water tank. The length of the cable between the point of attachment of the article and the body of the article determines the water level. The power cord terminal should never be inserted into water during installation.
• Instructions for use for the installation of the counterweight. Take off (peel) the plastic ring of the counterweight before installation and insert the cable through the ring, then insert the cable through the conical part into the counterweight and set it with a moderate pressure.

• Long Life (More than 9 Million Operation) & Shockproof..
• No current/Volatage is passed throught water level Water, therefore No Electrolysis Salt Deposition..
• New/Updated (Now it's Highly Durable).
• Corrosion Free Sturdy and durable need not maintain..

• Features: Fully automatic, Made in India, One Year Warranty, 4 level indication, motors up to 2 hp, 6 SS sensors, Silent operation, Auto & Manual Mode, Top-Up Switch (manual on auto off), WORKS WITH MCB TYPE STARTERS
• Package contents: Two High Plastic Float Switch sensor, Main controller panel, Instruction manual, Screws
• excellent quality
• no need of manpower
• easy to install

• Fully Automatic Operation with Manual Mode Selection
• Capacity upto 3 HP
• Stainless Steel Sensors
• Water level indication led's
• With Optional Underground Tank Installation

• Single Phase Fully Automatic & Semi Automatic Water Level Controller For Submersible
• With Manual ON-Auto OFF, Fully automatic and Semi Automatic Function
• Supported To Submersible And MonoBlock Motor
• Universal Model
• Supported Upto 2 hp

• Working : This Device will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want.
• Fully Automatic Controller ,Micro Controller Based Design ,Power Failure protection.(Not Start Motor Every Time on Power Failure.)
• No Man Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /.Avoid Overflow

• Warranty :2 Year Manufacturer. Warranty Service : Repair or Replacement. Package Contain : 1 Water Level Controller Unit. 3 S.S Sensors. 1 user manual with technical details.
• fully automatic start and stops the motor automatic
• power indication, motor on off indication and tank level indication provided.
• Auto and manual switch available Supply voltage : 220-270 V AC, Suitable to 0.1 HP to 2.0 HP Motor.
• 15 A relay provided. Load capacity 15 A

• Fully Automatic Operation with Manual Mode Selection
• Capacity upto 2 HP
• Corossion Free Shock Proof Stainless Steel Sensors 3 Nos
• Water level indication led's
• With Direct In line Water Detection Flow Sensor

• For Overhead Tank Only
• One Float Switch Sensor
• 15A Load Capacity
• Auto/Manual Switch
• Two Level Indication LED's