Water Management System - Water Level Controller Products

• Voltage: 250Vac Current: 15A Shape: Squarez
• Design Temperature: 80?C
• Contacts: No+Nc
• Cfls With 2 Meter Cable Length
• Buy with confidence ?for your best choices,the most comfortable goods ever have.If you have any questions, please contact us in time and we will help you solve them

• Normally Open Type (Yellow Wire) and Normally Close Type (Blue Wire)
• Corrosion Free Material
• Advance Magnetic Technology
• Cable Lenght : 2 meter
• Max Switch Current : 5A (DC), Max Switch Watt : 10W / VA, Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC

• The trendy carafe comes with a lid which has just the right design to help you pour out your coffee without any spillage.
• This carafe comes with a nylon filter which filters your coffee to perfection.
• The coffee maker comes with a water gauge indicator which helps you to fill in just the right amount of water for a tasty brew.
• The drip stop allows you to pour a cup of coffee before the full brewing cycle is finished.
• Fill the water tank easily and precisely with the water level indication.
• Ease of cleaning and maintenance with dishwasher-safe jug & filter holder, comes with 1-year warranty.

• SS pin molded within Plastic
• with 1 meter wire
• No electrical contact with water.
• 1/2 inch Thread for direct pipe mounting
• Note : Do not use with AC supply, Use 5-24V DC supply only

• Supports Single Phase AC230V. Suitable for Sump to Tank set up (Underground tank or ground level tank to Overhead tank set up).
• Checks the low level of water in sump
• Has Power ON, Motor ON LED and SUMP LOW LED indications.
• Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs. In MANUAL mode, the motor pump will be constantly running. By changing to AUTO mode, automatic operations occur.
• Suitable for motor pump operated by normal ON/OFF Switch or MCB.

• Visible Attractive LEDs for showing the tank level.
• Has an Audible buzzer alarm. Mute button is provided for stopping the buzzer sound. Very compact and portable design.
• A DIY product. Does not need any expertise person to fix it.
• Supports both contact type and magnetic float sensors. Microcontroller based intelligent circuit.
• Long lasting and User Friendly. 12 months warranty.

• FEATURES High reliabilityand Low maintenance
• Operational period. Low AC Voltage sensing
• It is Grey in colour

• SAVE WATER,TIME,MONEY
• fully auto FOR DUAL AND SINGLE TANK
• installation methods
• 1ST-INSTALLATION GUIDE IN PAKING BOX
• 2ND-INSTALLATION VEDIO ON YOU TUBE
• 3RD-YOU CAN CALL OR WATSUP OUR ELECTRICIAN

• Warranty :18 MONTH Manufacturer. Warranty Service : Repair or Replacement.
• THIS MODEL IS SUITABLE TO ANY 3 PHASE STARTER PANEL
• FULLY AUTOMATIC AUTO OFF WHEN TANK IS FULL OR SUMP IS EMPTY
• Suitable to any HP Motor as no load comes on our controller. Load passes to existing starter.
• Auto and Manual mode switch available, Sensor fault detection provided, if sensor got failed LED start blinking

• Fully automatic water level controller single phase
• Anti corrosion stainless sensor
• Contact capacity : 15 A
• auto, manual switch
• Tank water level indication, pump on indication

• Motor Wattage: 20A@230V
• Anti corrosion stainless sensor
• Garrenty: 6 Months
• Sensor with Cable 1 Meter
• Start, stop, auto, manual switch
• Tank water level indication, pump on indication
• Auto & Manual Mode

• Single Phase Fully Automatic Water Level Controller Panel
• Electrolysis Free
• With Inbuilt 150/200+36+36 Capacitor
• Up to 20 Amp overload and Dry Run Setable
• Digital Volt & AMP Meter

• Low Voltage (Below 290V), High Voltage (Above 480V) & Overload Protection (as per inverse time current characteristics) & SPP (Single Phasing Protection).
• Inbuilt time delay system (Protection from suddenly high power when main supply resume)
• Indication for Motor ON, High / Low Voltage , Overload & both upper & lower tank level indications
• Auto mode available to easy controlling (Auto Fill and Auto Off features available)
• Inbuilt water level, Upper and lower both tank level control. & Variable Current (Amp) setting.

• Cable: 3 Meter (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC and Weight: 635 g
• Endurance: =500,000 times of wire and Plastic Body Electrical
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

• Normally Open Type
• Corrosion Free Material
• Advance Magnetic Technology
• Cable Length : 2 meter
• Max Switch Current : 5A (DC), Max Switch Watt : 10W / VA, Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC

• Specially Design for Submersible Pumps (Low Cost)
• Corrosion free magnetic float sensors
• Save Electricity, Save Water, Save Money, Save Time
• Guarantee:1 Year Manufacture. Guarantee Service : Repair/Replacement.
• Automatic water level controller is used to automatically fill the over head tank as and when it gets empty and monitor the water level in it. Automatic water level controller switches ON the motor when the water level in the overhead tank drops below prefixed low level (on point) and puts off the motor when water level rises up to prefixed high level (off point). The system is very versatile.