Water Management System - Water Level Controller Products

• Operation Type:- Fully Automatic Tank Type:- Dual Tank
• Mounting Type:- Panel Usage/Application:- Water Level Controller Voltage:-230 V AC
• Size:- 24 CMx 24 CM x8.5 CM
• Capacity:- 2 Hp Current:- Max 22 Amp

• Endurance: ??500,000 times & High quality of wire and Plastic Body Electrical
• Cheryy float switch for Water tank, Water Cooler, hard water or fuel such as diesel, kerosene, oil and other heavy water storage container for on/off switch.
• It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
• Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
• Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.

• For Overhead Tank Only
• 15A Load Capacity
• Auto/Manual Switch
• Two Level Indication LED's

• Five Nos. Of Sensors
• No Corrosion Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Long Length Of Wire Of 1.5meter Is Suitable For Tanks Upto 2000 Litres

• Cable Length : 2 Meter Corrosion Free Material
• Can be Used With Tank Pools , Hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps Water Level Controllers etc.
• Caution : Your Project Should Not Have Mercury in It
• Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC, Max Switch Current : 500 mA (DC), Max Switch Watt : 10W
• Advance Magnetic Technology

• Controls both Submersible Pump and Openwell Pump
• Dryrun Protection system Facility For Both Openwell and Submersible pump.
• Compatible with 1 Phase and 3 Phase Pumps
• Corrosion free magnetic float sensors
• 1 year full replacement guarantee

• Compatible with most of water level indicators and controllers.
• Completely insulated wire joints.
• Cable Length: 1 Meters.
• Physical Damage Not Included.
• Purification Method: Gravity

• Automatically switches ON and OFF the motor pump depends on the water in the tank
• Embedded technology gives long life, less power consumption protection to pump
• Semi auto and Fully auto functions along with Manual Start and manual stop switches
• LED indicators are provided for power,tank full and motor on
• 3 stainless steel sensors 1.5 meters each

• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC
• High Quality Cable (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• Endurance: =500,000 times of wire and Plastic Body Electrical
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

• No Men Power Required To Operate As Fully Automatic with 2HP capacity
• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• Auto/Manual Mode & With Float Switch Sensor
• Package Contains : 1 Main Unit, 1 Flot Sensor & User Manual Full Kit
• 1 Year Warranty For Device & Flot Sensor

• Three Nos. Of Sensors
• Anti Corrosion Carbon Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Shock Proof
• Long Life
• No Contamination
• With Wire Length Of 1.5m These Sensor Are Suitable For Tanks Up to 2000L

• Fully automatic water level Controller. (If using it with submersible panel, than panel only with run capacitor will compatible with this device)
• Compatible with Mono-block Motor and Submersible Panel.
• Suitable for 0.5 to 3.0 HP For Mono-Block Motor / For Submersible Motor it Depends on your Submersible Panel's Start & Run Capacitors. (Contact Us for More Details)
• Overhead and Underground Tank Controllable?(With Automatically Start Features)

• Fully automatic water level controller single phase
• Automatic as well as Manual mode of operation & Pump on indication
• Anti corrosion magnetic float sensor
• Current capacity : 15 A
• 6 Month of Warranty

• One Year Warranty, High Grade Magnetic Float sensors, Motors up to 2Hp, Fully Automatic, Made in India, Easy Installation, Silent Operation, Auto & Manual Mode, Durable, Compact, Shock Proof Plastic Enclosure
• Fully Automatic Operation: Turns the motor ON when water level falls below 25% and turns it OFF when the tank is full.
• Package contents: Magnetic Float Sensors , Main water level controller panel, Instruction manual, Screws & Wire ties
• Suitable for single phase MCB Type Motor Starters and Submersible Pumps
• Easy Installation: Installation manuals in Hindi and English make installation very simple

• Endurance: ??500,000 times & High quality of wire and Plastic Body Electrical
• Cheryy float switch for Water tank, Water Cooler, hard water or fuel such as diesel, kerosene, oil and other heavy water storage container for on/off switch.
• It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
• Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
• Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.

• Automatically Switched OFF the motor as soon as the tank is filled with the water. It eliminates manual efforts and provides a flawless automatic operation.
• Automatically Switched OFF the motor as soon as the tank is filled with the water. It eliminates manual efforts and provides a flawless automatic operation.
• Solves the water tank overflow problem by switching off the motor at the correct time. This will save a great amount of water and minimize wastage and provides a peace of mind.
• Automatically Switched ON the motor when the water level decreased to a certain level, this will ensure smooth and un-interrupted water supply throughout.
• Save Water Save Electricity Save Time.
• Suitable for 3 phase water pump (starter)