Water Management System - Water Level Controller Products

• Endurance: =500,000 times of wire and Plastic Body Electrical
• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC and Weight: 660 g
• Cable: 3 Meter (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

• Fully Automatic Operation with Manual Mode Selection
• Capacity upto 2 HP
• Corossion Free Shock Proof Float Sensors 3 meter wire
• Water level indication led's
• With Optional Underground Tank Installation

• TIMER CONTROL, MANUAL ON/OFF & GERMAN MADE SENSOR: Water Overflow Controller with Timer, Manual ON and Auto Off, Along with German Made Magnetic Sensor : 1 Year Warranty.
• MULTIPLE TIMER OPTIONS AND PROTECTION : Peace of Mind with Timer Control which switches OFF Pump/Motor after pre-set time or Tank Full whichever is earlier (Options of Approx. 7.5, 15, 30, 60 Minutes to Switch OFF the Motor Automatically).
• HIGH QUALITY COMPONENTS : High Quality PCB, Circuit and Components, Stabilized Controlled Device (Consistent Performance of Device even in Electricity Fluctuations).
• KEY FEATURES : Tank Full Indication, Pump/Motor ON Indication, Power ON Indication, Push Button Switch to start the Pump/Motor (Suitable for Single Phase Motor).
• HEAVY DUTY : Powder Coated long lasting Metal Body, Quality Terminals to withstand heavy electrical load. Controller Suitable for Single Phase Pump/Motor upto 2HP.

• Saves Electricity, save water.1 Year Warranty
• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• No Men Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /. Avoid Overflow
• Package Contains : 1 Main Unit,3 Units SS Sensors and 0.75*3 core Wire

• Indiacate level of tank
• Save Electricity
• Brust Free SS Sensor
• Save Water

• The sensor controller can stabilize the water pump (solenoid valve) of the pool (water tower), automatically open when pumping water, and automatically stop the pump (solenoid valve) when full of water.
• The sensor controller does not need to purchase additional probes, and the probes can be replaced with household wiring.
• This is a sensor controller that can be used in places such as pond water tanks, garages, basements and rainwater automatic drainage.
• The small size sensor controller has simple wiring, not only low power consumption, high switching capability, but also strong anti interference and stable function.
• The sensor controller controls the water level according to the actual needs of the family factory and the water pumping and detection pool (water tower) to achieve control.

• For 2 H.P/2 Tank's Controllable With Capacitor:- Run(36+36 mfd.) and Start(50 mfd.) Capacitor
• Low Voltage (130V), High Voltage (270V) & Overload Protection.[With Amp. Adjustable Knob]
• High / Low overload and Auto / Manuel LED indications with Empty & Full tank LED indications too.
• Why & What Is Run Capacitor? :- The Run Capacitor Is Inbuilt Provided In The Device. The Run Capacitor Provides Support To The Motor During Its Running Or Operational time And This Run Capacitor Is of (36+36 mfd.), Therefore, It Can Operate 2.0 Hp.
• Why & What Is Start Capacitor? :- The Start Capacitor Is Inbuilt Provided In The Device. The Start Capacitor Is Provided Because With Time And Regular Use Some Of The Motors Don't Start Or Get Required Pick Up On Its Own So Here The Start Capacitor (72.mfd) Provided Gives Extra Support To The Motor So That Motor Can Get Its Pick Up And Start Without Any Problem.

• Endurance: =500,000 times of wire and Plastic Body Electrical
• Rated voltage: 250V and Rated current: 8A/Contacts: NO+NC and Weight: 635 g
• Cable: 3 Meter (customized wire length is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure

• 1. Suitable for motor upto 1.5 HP that are operated by simple switch or MCB
• 2. Four levels of indication 25%, 50%, 75% and 100% is given using bright Red Leds. These LEDs increase the visibility to the users even from long distance.
• 3. No hassles of cabling from tank to ground floor. 3. Minimizes the installation and cabling cost. Also minimizes the expenses of rewiring due to wear and tear of the cable.
• 4. Very Compact and Handy. Advanced embedded technology is used.
• 5. Easy trouble free installation. Highly durable with Long life and 1 year warranty

• Degree of tightness: IP-68
• Maximum temperature: 60? C
• Rated Voltage:- 220-250V; Frequecy:- 50/60Htz; Rated Current:- 10A; Contacts:- NO+NC; Weight:- 625 Gm; Maximum Working Temperature:-60 c; IP Rating:- IP68
• Installation: Set the counterweight on the power cable to control the level. Connect the electric cable to the electric pump and then fix it inside the water tank. The length of the cable between the point of attachment of the article and the body of the article determines the water level. The power cord terminal should never be inserted into water during installation.
• Instructions for use for the filling operation. Connect the blue control cable to the electric pump and the black wire to the neutral wire as shown in the picture to fill it with water (the brown wire must be waterproof). The electric pump begins to fill with water and when the water in the tank reaches a level stops working.
• Instructions for use for the emptying operation. For the draining operation connect the brown cable to the water pump and the black cable to a neutral cable, as shown in the picture (the blue cable must be insulated). The electric pump stops when the water level reaches a level and if it exceeds this level it starts again to expel water.
• Instructions for use for automatic filling and automatic emptying. the connection scheme of auto-switch filling and emptying of water, which is an extension of the two basic functions.
• Instructions for use for the installation of the counterweight. Take off (peel) the plastic ring of the counterweight before installation and insert the cable through the ring, then insert the cable through the conical part into the counterweight and set it with a moderate pressure.

• Cable Length: 1.5 Meters
• Completely insulated wire joints, No Leak Problems
• No Maintenance
• US standard Tin Plated copper wire

• Indiacate level of tank
• Save Electricity
• Brust Free SS Sensor
• Save Water

• Fully automatic water level controller with dry run protection single phase
• Anti corrosion stainless sensor
• Contact capacity : 30 A
• Start, stop, auto, manual switch
• Tank water level indication, pump on indication

• Saves Electricity, save water. 1 Year Warrenty
• Comes in a safe packaging
• Fully Automatic Controller ,Micro Controller Based Design ,Power Failure protection.(Not Start Motor Every Time on Power Failure.)
• No Man Power Required To Operate As Fully Automatic with 2HP capacity

• Saves Electricity, save water.1 Year Warranty
• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• No Men Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /. Avoid Overflow

• Warranty:1 Year Manufacture. Warranty Service : Replacement. Package contains:1 Water level controller unit, 3 Sensors, 1 User Manual with all technical details, 1 Pack mounting screw, 1 warranty card.
• Working : As shown in the above diagram out of three sensors, 1 sensor put at the bottom, 1 sensor put at middle, and 1 sensor at top level of the tank. When the water level in the tank becomes low, means water get down from middle sensor, motor get switch on automatically. The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. the motor automatically gets switched off. No Man power is required.
• Supply voltage : 220-270 V AC, Suitable up to 2HP Motor. Also suitable for single phase MCB starter panel & submersible motor.
• Auto and manual switch available. Sensing Elements: Carbon sensors, so that it is free from oxidation. Long life.Every care is taken for packing so that the item reaches to the buyer safely and undamaged. Manufacture in Ahmedabad. Made In India Product.