Water Management System - Water Level Controller Products

• Endurance: ??500,000 times & High quality of wire and Plastic Body Electrical
• Cheryy float switch for Water tank, Water Cooler, hard water or fuel such as diesel, kerosene, oil and other heavy water storage container for on/off switch.
• It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
• Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
• Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.

• Fully automatic water level controller for single phase
• Anti corrosion stainless sensor
• Contact capacity : 2 HP
• Start, stop, auto, manual switch
• Tank water level indication, pump on indication

• Has LED Indications For Motor ON. Also Has High And Low Level LED Indications To Know The Level Of Both Tank There Will Be One Low Level LED Indication For Sump. Dry Run Protection. Corrosion Free Sensors. Has MANUAL Mode And AUTO Mode Functions. In AUTO Mode, AUTO ON And AUTO OFF Operation Occurs.
• In MANUAL Mode, The Motor Pump Will Be Constantly Running. This Controller Unit Has A Fully Automatic Function (Manual ON And Auto OFF Function). Just Keep The Controller In MANUAL Mode For The Motor
• Fully Automatic Water Level Controller For Tank Sump This Model Will Automatically Switch ON And Automatically Switch OFF The Motor. Has AUTO ON And AUTO OFF Operation. AUTO ON Occurs When The Tank Level Is Low Confirming Water Is Present In The Sump. AUTO OFF When Tank Is Full Or When Sump Is Empty Suitable For Motor Pump Upto 2 Hp Operated By A Normal ON/OFF Switch / MCB. Suitable For Electronic Starter. For Sump To Tank Set Up (Underground Tank Or Ground Level Tank To Overhead
• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• Work with any single phase or submersible motor for home, office, hospital, restaurant

• Working : As shown in the diagram out of three sensors, 1 sensor put at the bottom, 1 sensor put at middle, and 1 sensor at top level of the tank. When the water level in the tank becomes low, means water get down from middle sensor, motor get switch on automatically. The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. the motor automatically gets switched off
• Warranty : 1 Year Manufacturer. Warranty Service : Repair or Replacement. Package Contain : 1 Water Level Controller Unit. 3 no S.S Sensors. 1 user manual with technical details
• Water level indication provided to see water level in tank. Motor ON OFF indication provided. High quality ABS Enclosure. No man power is required as it is operate as fully automatic. Supply voltage : 220-270 V AC, Suitable to 0.1 HP to 2.0 HP Motor. Also suitable for single phase MCB starter panel and submersible motor
• Auto and manual switch available. In auto mode, motor start and stop automatically. In manual model, motor start and stop with manual switch, No additional wiring require to operate motor in manual. Sensing Elements: S.S sensors, it is free from oxidation. Long life. Any conducting wire can be use for sensor

• Working : This Controller will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want
• Sensing element : carbon sensor, it is free from oxidation, long life. Also Suitable for MCB Starter panel see diagram above for connection. Power ON OFF LED Indication Provided. Motor ON OFF Indication provided. Tank Empty and Tank Full indication provided. high quality ABS enclosure. compact size
• Warranty: 1 Year Manufacture, Warranty Service : Replacement, Package contains : 1 Water level controller unit, 2 Sensors, 1 User Manual with all technical details, 1 Pack mounting screw
• Suitable for motor up to 5 HP. 40 A Load Capacity, Supply Voltage : 220-280 VAC
• Contact Details : if you need further details fell free to contact us. Company : Mivan Technologies. Contact Person: Mehta,

• Control both tank underground tank to overhead tank fully automatically
• Work With Any Single Phase Motor For Home ,Office ,Hospital,Restaurant
• No Man Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /.Avoid Overflow & Dry Running
• Saves Electricity, save water. 1 Year Warrenty

• GENERAL INTRODUCTION?Our Automatic Water Level Control Valve is patented product which is instead of traditional float valve. It automatically control the water supply and stop according the water level changes. It can solve the water leakage problem, save more than 60% water.
• APPLICATION?Water tank, water tower , livestock drinking, air cooling, hydroponics, machinery, humidifier, swimming pool, toilet ,solar energy, water heating boiler, aquarium and other industrial applications etc .
• WORK PRINCIPLE?When water level rises to water limited line, the Water Level Control Valve will stop supplying water immediately; when water level drop, the valve will start to supply water automatically.
• Small size and easy to install , Work pressure: 0.01MPa~1.5MPa
• This product is an automatic water level control valve that can move automatically, regular inspection and maintenance is necessary.
• Install Guide - Before installing, please clean the imp. Purities in the pipeline to avoid blocking in the valve. The valve should be fixed horizontally and then connect the water level control valve to the water inlet. When install, the valve must be exactly vertical to the tank wall

• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• Work with any single phase or submersible motor for home, office, hospital, restaurant

• Water Level Monitoring: The float switch sensor is specifically designed to detect water levels accurately and efficiently.
• Versatile Application: The sensor can be used in a wide range of settings, including reverse osmosis systems, water tanks, sumps, and other liquid level monitoring applications.
• Cable Length: With a generous 2-meter wire, the sensor allows for convenient installation and positioning to suit your specific needs.
• Durable Build: The float switch sensor is constructed from high-quality materials, ensuring durability and long-lasting performance even in challenging environments.
• Easy Installation: The device is designed for simple installation, allowing users to set it up without the need for specialized tools or technical knowledge.

• 3 Mode Operations: Fully Automatic - Semi Automatic - Manual Mode
• Pure Wireless Installation with 2-3 Year Transmitter Battery Life on SIngle set of 3 AA Cells
• Shock proof with Dedicated Filter Technology.
• 24*7 water level indication with 4 level indication and error indication.
• Manual Control in all levels to start or stop the pump at any time.
• In case of any Fault very easy to Bypass.
• Low Power indication for Transmitter Unit.
• Long Range of 2-5 Kilometers / 50 Floors.

• Fully Automatic Operation with Manual Mode Selection
• Capacity upto 2 HP
• Corossion Free Shock Proof Float Sensors 2 meter wire
• Water level indication led's
• With Optional Underground Tank Installation

• AUTOMATIC: Fully automatic control, self-replenishment with less water, and self-stop with full water.
• INDIA: First Made in India Water Level Control Valve.
• FEATURES: Beautiful appearance, small size, strong practicability, simple installation.
• LONG-LASTING: No need to use electricity, easy to use, long life, low failure rate, save water resources.
• CAPACITY: Working Water Pressure Range: 0.2 to 12 bar. Quarter water inlet, large amount of water.
• Please read MANUAL carefully, before installation.

• Control Inline To Overhead Tank Fully automatically.When Water coming From Pipe line Motor will start automatically ,and when tank Full Motor Will Stop Automatically.
• Work With Any Single Phase Motor Work with MCB switch type StarterFor Home ,Office ,Hospital,Restaurant
• No Man Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /.Avoid Overflow & Dry Running
• Saves Electricity, save water. 1 Year Warrenty

• For Underground Tank Only
• Three Non-Corossive Sensors
• 15A Load Capacity
• Auto/Manual Switch
• Two Level Indication LED's

• Working : This Controller will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want.
• No man power required to operate as fully automatic with 2HP capacity.
• Work with any single phase or submersible motor for home, hospital, restaurant.
• Customer support Number for installation process: 1800123115599

• Semi automatic Water Level Controller By Bee Smart
• Supply voltage : 190-250 V AC, Suitable up to 0.5 / 1.0/1.5 HP Motor.
• Package contains: Semi Automatic Water level controller 1 unit, and connection Drawing , Sensor one pair.
• Warranty:1 Year Guaranty Replacement.
• Manufacture in GURUGRAM Made In India Product.